Screws

well, useful if you use alot of M1.2 screws. And they don't seem to have an M1.2 tap?

Thanks for the link though - Seems like they've got a decent selection. I'm pretty lacking in the small end for taps / drills / screws. Smallest I've got is 2-56 and that's comically oversized for camera stuff...
 
I don't think the screws on offer will be of much interest to me as I tend to be looking for slotted types used in German kit. But the site has a lot of other specialist stuff that's potentially very handy indeed, so I've bookmarked it for future reference. Thanks for the heads up!
Cheers,
Brett
 
well, useful if you use alot of M1.2 screws. And they don't seem to have an M1.2 tap?

Thanks for the link though - Seems like they've got a decent selection. I'm pretty lacking in the small end for taps / drills / screws. Smallest I've got is 2-56 and that's comically oversized for camera stuff...

I haven't needed a tap as small as that but I did recall that Grainger has some options:
https://www.grainger.com/category/taps-and-tap-sets/threading/machining/ecatalog/N-13wkZ1yza8t5

I don't think the screws on offer will be of much interest to me as I tend to be looking for slotted types used in German kit. But the site has a lot of other specialist stuff that's potentially very handy indeed, so I've bookmarked it for future reference. Thanks for the heads up!
Cheers,
Brett

I used to make miniature furniture and small boxes and these folks had/have a good selection of small scale stuff. I have also built at least 2 pinhole cameras solely from their catalog.

Rob
 
Back
Top Bottom