Show me your latest darkroom prints

Erik van Straten said:
Leica M5/Summicron 50mm v4/TMY400-2/AdoxMCC110

Erik.

49702555196_31ae307336_b.jpg
Click to expand...


I love this one!
 
Hill Rd Statue Makiflex Auto 360mm f6.8 TeleXenar by Nokton48, on Flickr

Plaubel Auto Makiflex with 360mm f6.8 Schneider Tele-Xenar in Plaubel Makiflex auto-iris mount. My first test of this new to me lens. A nice compliment to my 360mm Tele-Arton, which is bigger and faster. The 360mm Tele-Xenar is often used by 4x5 Speed Graphic Guys; it is underrated and was very popular. Much less bellows draw with this lens, being a telephoto design.

Ilford FP4+ in 120 Plaubel 6x9 Makina Back, ADOX Borax MQ Dev Aristo #2 5x7 RC Multigrade dev
 
Makiflex Rollei Retro Soft 9x12cm 360 Kern Microdol-X by Nokton48, on Flickr

Pacaderm showers in Goodale Park on a soft winter day.

Plaubel Makiflex 9x12cm Rollei Retro Soft sheet Film Kern Arau 360mm F9 repro lens Microdol-X Arista 8x10 RC #3 Multigrade dev

Full neg image shown 9x9cm photography on 9x12 sheet film. I used a RADA Normalfalz plate holder with film insert to hold the film.
 
Today i finished this print. Things no longer here. The church has burned down. I no longer have the '38 Deardorff, I took this photo with. I'm down to my last sheets of Azo, which went out of production in 2008.
unnamed-4
5"x7" contact print on Kodak Azo.
 
Deardorff38 said:
Today i finished this print. Things no longer here. The church has burned down. I no longer have the '38 Deardorff, I took this photo with. I'm down to my last sheets of Azo, which went out of production in 2008.
unnamed-4
5"x7" contact print on Kodak Azo.
Click to expand...

Beautiful. I love the 5x7 aspect ratio.

This too shall pass. If you miss Kodak Azo, Adox Lupex or the Lodima contact paper are essentially the same, although they are double weight and the image colours vary a bit when using the same developers.

Marty
 
"Beautiful. I love the 5x7 aspect ratio...If you miss Kodak Azo, Adox Lupex or the Lodima contact paper are essentially the same, although they are double weight and the image colours vary a bit when using the same developers."
Marty

Thanks Marty, I have used 2 production runs of Lodima. I'm doing less contact printing since I got a Durst 138 but Azo was pretty impressive stuff and i'm down to the last of my stash
 
unnamed-7 by , on Flickr
Rolleiflex T, Tri-X, Foma Variant lll, Ansco 130
St Katherein kirche, Hafling, Meran, Sud Tirol
 
You must log in or register to reply here.
Back
Top Bottom