Some Wide Open Hex 50/1.2 Photos

gdi

Veteran
Local time
3:41 PM
Joined
Nov 26, 2006
Messages
2,632
I received my 50/1.2 back form an adjustment by DAG last week. And now it is properly focusing on the M8. Here are some samples at 1.2...

FD-Hex1-2-1.jpg


FD-Hex1-2-3.jpg


FD-Hex1-2-2.jpg
 
Nice ... different to a Noct but definitely has a look that distinguishes it.

Having had it adjusted for the M8 I gather it will focus accurately on all other M bodies?
 
@keith - it prolly focusses just fine all the other M-bodies. it seems the hexanons have focussing issues on the M8.
 
Thanks Nick - I know its a bit silly to shoot @1.2 in the daylight, but it is fun.

Regarding the lens on film. While I haven't tried it, I expect it might work ok due to the forgiving nature of film. I may have time to try it this weekend.

Keith, I agree it doesn't have a clearly distinctive look as the Noctilux does (or some other vintage lenses) but it is surprisingly sharp @1.2.
 
Last edited:
Hi all, is it 100% that Hexanon 50mm f1.2 will have alignment problems with the m8? And does this "misalignment" unique to only the m8 (i assume its the sensor positioning) and not other film Leica like the m6 or m7?

And if so, what can we do to align it?

Cheers :)
 
Hi all, is it 100% that Hexanon 50mm f1.2 will have alignment problems with the m8? And does this "misalignment" unique to only the m8 (i assume its the sensor positioning) and not other film Leica like the m6 or m7?

And if so, what can we do to align it?

Cheers :)

I would think most would need adjustment - not really alignment. I have heard of others that did and most would be very much like new, so it wouldn't be a case of wear and tear for the most part.

I haven't tried mine on a film camera, I think with the lower tolerance of film it would be ok, but....
 
Hi all, is it 100% that Hexanon 50mm f1.2 will have alignment problems with the m8? And does this "misalignment" unique to only the m8 (i assume its the sensor positioning) and not other film Leica like the m6 or m7?

And if so, what can we do to align it?

Cheers :)

Played and own a number of Hexanon lenses (including both f1.2 lenses). No issues with foucusing with the M8. Apparently, it seems to affect only low serial numbers of the 50 f1.2 and they need some minor adjustments (<100). Friend has a 50 f1.2 and it was sent to DAG. His 60 f1.2 is fine.
 
Apparently, it seems to affect only low serial numbers of the 50 f1.2 and they need some minor adjustments (<100). Friend has a 50 f1.2 and it was sent to DAG. His 60 f1.2 is fine.

It is not just low serial # 50s - mine is quite high. DAG adjusted it nicely. Never tried the 60....
 
ic.. thanks guys for the feedback. I guess the Hex is a really good piece of glass to shoot with. my piece is arriving this week ;p
fingers crossed I dont have to adjust it. Cheers!
 
Heres mine all shot wide open with m6ttl:
my only complain is that it is very difficult to focus on a 0.72, 0.85 will be alot better ;)

2631458260_bc1e566619_o.jpg


2625024516_88dbf09273_o.jpg


bokeh test
2619211096_d3d8308abb_o.jpg


2628614252_3b7099faf6_o.jpg


2627796325_737bd0a090_o.jpg
 
Last edited:
I hope to bring this thread to life - maybe some of our lucky owners of the fast Hexanon 50/1.2 (or 60/1.2) could post some more photos from these lenses? Please, please, please. ;)
 
I hope to bring this thread to life - maybe some of our lucky owners of the fast Hexanon 50/1.2 (or 60/1.2) could post some more photos from these lenses? Please, please, please. ;)


I really have to get out and use it more. Here are a couple more I posted over in a carnival thread...

Hex-50-1.2-2.jpg


Hex-50-1.2-3.jpg


Hex-50-1.2.jpg

 
Back
Top Bottom