SP verticle alignment

[Charles D. Orze]

Hi folks,

I took out my rangefinder to clean the 28/35 finder (it was hazy--what a picky #@%* to work on--three glued prisms and no housing!). Got it all back together and the verticle alignment is off by a smidge. I can find the setscrew to release the tooth wheel to adjust the verticle, but I cant find the wheel. Is it to the left or the right of the setscrew as I face the camera. Thanks for your help.

Charlie

 

[xayraa33]

this old post might help you out.
http://www.rangefinderforum.com/forums/showthread.php?t=21348

 

[Charles D. Orze]

S3 not same as SP

S3 not same as SP

Thanks--the S3 is not configured the same as the S3.

SP anyone?

Thanks,

Charlie

 

[xayraa33]

did you read post # 11 in the thread , written by Brian Sweeney?
he talks about the SP.

 

[Charles D. Orze]

Got it--

Got it--

Hi,

I missed the final post. My vertical won't come fully in line--just jambs. time to call it a day.

Best,

Charlie