wes loder
Photographer/Historian
wes loder
Photographer/Historian
Tenax closeup
Tenax closeup
Well. I guess no one cares, but, anyway, to answer all the deep, held breaths of the curious:
Picture was taken on a Multiphot with 120mm Macro Nikkor. A B2 ring bayoneted on top established flat surface to rest camera on. Focus with a Tenax II with shutter open and ground glass on focal plane ('E' screen for Nikon F). Substitute Tenax II loaded with film. Exposure determined with a Nikon FM.
Nice to have cameras with removable back to set up focus.
Cheers, WES
Tenax closeup
Well. I guess no one cares, but, anyway, to answer all the deep, held breaths of the curious:
Picture was taken on a Multiphot with 120mm Macro Nikkor. A B2 ring bayoneted on top established flat surface to rest camera on. Focus with a Tenax II with shutter open and ground glass on focal plane ('E' screen for Nikon F). Substitute Tenax II loaded with film. Exposure determined with a Nikon FM.
Nice to have cameras with removable back to set up focus.
Cheers, WES
Jerevan
Recycled User
Cool, but what sort of lens is this? Does it actually fit a Tenax?
wes loder
Photographer/Historian
Tenax closeup
Tenax closeup
Answer to your question: The front standard of the Tenax is flat and quite wide. It was not difficult to set and center the camera on the threaded rim of a B2 (K2) ring which is 52mm male thread. The B2 ring, in turn, bayonets onto the back standard of the Multiphot. The Multiphot uses Nikon F mountings both front and back. Since the multiphot unit is vertical and the camera lies horizontally, it will stay in place with a decent light seal when you set it on the ring. The challenge was focus. For this, I used a ground glass on the film rails as I noted above. I used to use a big piece of ground glass, but a F focusing screen is a lot easier and more accurate. Hope this helps. WES
Tenax closeup
Answer to your question: The front standard of the Tenax is flat and quite wide. It was not difficult to set and center the camera on the threaded rim of a B2 (K2) ring which is 52mm male thread. The B2 ring, in turn, bayonets onto the back standard of the Multiphot. The Multiphot uses Nikon F mountings both front and back. Since the multiphot unit is vertical and the camera lies horizontally, it will stay in place with a decent light seal when you set it on the ring. The challenge was focus. For this, I used a ground glass on the film rails as I noted above. I used to use a big piece of ground glass, but a F focusing screen is a lot easier and more accurate. Hope this helps. WES
wes loder
Photographer/Historian
Multiphot
Multiphot
I might add, for those not familiar with it, the Multiphot is a heavy, massive copy stand similar to the Leitz Aristophot. Nikon marketed it in the 70s and 80s. Quite rare, expensive and the Macro Nikkor lenses for it are also expensive. It is kind of like a microscope on steroids. But you can't do better for stationary photomacrography.
WES
Multiphot
I might add, for those not familiar with it, the Multiphot is a heavy, massive copy stand similar to the Leitz Aristophot. Nikon marketed it in the 70s and 80s. Quite rare, expensive and the Macro Nikkor lenses for it are also expensive. It is kind of like a microscope on steroids. But you can't do better for stationary photomacrography.
WES
shadowfox
Darkroom printing lives
Maybe the picture of the whole setup to further educate us.
wes loder
Photographer/Historian
raid
Dad Photographer
Very cool set-up. Thanks.
wes loder
Photographer/Historian
Hi, Raid. Have posted several photos in the gallery taken with Tenax II in the last two days. I know you might be interested. WES
raid
Dad Photographer
Hi Wes,
I see that you have the 7.5cm Zeiss for the Tenax II. How good is this lens?
I see that you have the 7.5cm Zeiss for the Tenax II. How good is this lens?
wes loder
Photographer/Historian
The 7.5cm Sonnar I have is prone to flare due, in part, to the large front element. When I use it away from light sources, it does well. I always use a shade. It is compact and light—which I do like. Not as good as the 4cm Sonnar, but certainly usable. Only focuses down to five feet. Nice for portraits. WES
wes loder
Photographer/Historian
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.