raytoei@gmail.com
Veteran
gerbilthemistake:
hc110:
I developed tri-x for 8mins at room temperature of 29 - 31C. in a paterson tank, I use 4.8ml of hc-110 with (100-4.8ml) of water. This is Dilution H.
The agitation method is standard, ie. agitate for initial 30 seconds, and agitate every 5 seconds of every 30 seconds there after.
My issue with the picture is that I need to increase the development time a bit more and perhaps increase the agitation.
hc110:
I developed tri-x for 8mins at room temperature of 29 - 31C. in a paterson tank, I use 4.8ml of hc-110 with (100-4.8ml) of water. This is Dilution H.
The agitation method is standard, ie. agitate for initial 30 seconds, and agitate every 5 seconds of every 30 seconds there after.
My issue with the picture is that I need to increase the development time a bit more and perhaps increase the agitation.
Chris101
summicronia
I always thought that HC110 would just explode at 31°C!
gerbilthemistake
Well-known
Thanks, Yeah I will have to give it a try and compensate a bit as well with the water temperature difference (right now the average is around 76-78 degrees F)