x-ray
Veteran
Sure that works but you can use a hair dryer if you're in a hurry. I've dried many hundreds of prints this way.
Use of Print Dryers with Both FB and RC Papers?
- Thread starter Baybers
- Start date
- Latest activity Latest activity:
- Replies 22
- Views 4K
Sure that works but you can use a hair dryer if you're in a hurry. I've dried many hundreds of prints this way.
bence8810
Well-known
Also interested in this...
I've printed up to 8x10 in FB and with the double weight paper I see no trouble but the thin single weight paper was indeed a bit hard to lift out. Perhaps two tongs?
Ben
Fotohuis
Well-known
For PE/RC you can use a hair dryer. You have also devices where you can put a few PE/RC papers on a rack with this method. Alternative a real I.R. PE/RC dryer. Which I also have to suppress the blooming effect.
For fiber/baryta I have two methods: Cold method with aquarel tape on glass. And the above mentioned hot press where I am drying it on the cloth and especially for Fomabrom Variant not over 55C. After the process the fiber print is put under pressure (can be a lot of books) to dry and stay flat.
For fiber/baryta I have two methods: Cold method with aquarel tape on glass. And the above mentioned hot press where I am drying it on the cloth and especially for Fomabrom Variant not over 55C. After the process the fiber print is put under pressure (can be a lot of books) to dry and stay flat.
Similar threads
