V500 "overlaps" scans

[papo]

I never had issues scanning medium format negs, this is the result in preview and in final scans that i suddenly got since yesterday.

Any ideas? Thanks

Image doesnt show for some reason, heres the link:

http://imgur.com/48Pj8BX

 

[xvvvz]

Did you double check that the format selection within the Epson software is correct for your format? Is the holder tight against the top and right edge of the scanner bed? Film is placed in the holder toward the top of the film channel so that the first frame is lined up right at the end of the film channel? Nothing covering any part of the calibration gap?

Doug

 

[Mackinaw]

I think it’s an Epson Scan thing. My old 4490, using Epson Scan, does the same thing on occasion. I'm mainly a Silvefast user, so for me, it isn't a big deal.

Jim B.

 

[papo]

Did you double check that the format selection within the Epson software is correct for your format? Is the holder tight against the top and right edge of the scanner bed? Film is placed in the holder toward the top of the film channel so that the first frame is lined up right at the end of the film channel? Nothing covering any part of the calibration gap?

Doug

HI, i have defenitely checked the format and as it turns out, it was already automatically detected by the scanner. THe holder also appeared to be placed/locked in as it should when scanning.

As for the calibration gap, i dont understand what you mean?