Taipei-metro
Veteran
Yokosuka Mike
Abstract Clarity
Shifting Gears

Sony A7III camera
Sigma 35mm f2 lens
April 2024 - Yokohama, Japan
Sigma 35mm f2 lens
April 2024 - Yokohama, Japan
Taipei-metro
Veteran
Taipei-metro
Veteran
Taipei-metro
Veteran
Yokosuka Mike
Abstract Clarity
Another over-the-top ape-hanging motorcycle picture 
Different strokes for different folks!
Different strokes for different folks!

Sony A7III camera
Sigma 65mm f2 DG DN Contemporary lens
May 2024 - Yokohama, Japan
Sigma 65mm f2 DG DN Contemporary lens
May 2024 - Yokohama, Japan
Dogman
Veteran
A guaranteed method to make your hands go numb within a few miles.
Yokosuka Mike
Abstract Clarity
One for the Dogman
Sony A7III camera
Sigma 65mm f2 DG DN Contemporary lens
May 2024 - Yokohama, Japan
Sigma 65mm f2 DG DN Contemporary lens
May 2024 - Yokohama, Japan
Yokosuka Mike
Abstract Clarity
Motorcycles


Sony A7III camera
Sigma 65mm f2 DG DN lens
Yokohama, Japan - June 2024
Sigma 65mm f2 DG DN lens
Yokohama, Japan - June 2024
Last edited:
Yokosuka Mike
Abstract Clarity
Motorcycles

Sony A7III camera
Sigma 65mm f2 DG DN lens
Yokohama, Japan - June 2024
Sigma 65mm f2 DG DN lens
Yokohama, Japan - June 2024
Last edited:
AlwaysOnAuto
Well-known
Yokosuka Mike
Abstract Clarity
Motorcycle

Sony A7III camera
Sigma 90mm f2.8 DG DN lens
Yokohama, Japan - June 2024
Sigma 90mm f2.8 DG DN lens
Yokohama, Japan - June 2024
Taipei-metro
Veteran
Taipei-metro
Veteran
AlwaysOnAuto
Well-known
Moto-Uno
Moto-Uno
Dogman
Veteran
Nice bike. Guzzi engine/drive in a custom frame?
Dan
Let's Sway
A quick 12 1/2 hr ride to take in some of the B.C interior mountains . The Duffy Lake Rd can be quite the challenge on sport-bikesView attachment 4839623 and those staggeringly expensive ATV's . Nobody could believe seeing me ride by them when they were stopped taking pictures ! Kinda puts a smile on your face !
"Peterbuilt" => Love it!
Moto-Uno
Moto-Uno
I pretty well built the entire thing myself , bent and notched the tubing (tools from Pro-Tool) for the frame and swing-arm, I also bent the tubing that is the internal skeleton for the fuel tank . Did all the welding with a Lincoln Tig welder and then bought a DeVilbiss paint gun and some paint and tried my hand a painting and pin striping . All in all it took me 3 years and 3 months ( and I was working at a custom bike building shop at the time.). When I was done it cost the same as the rear wheel assemblies on some of the bikes that were being built there in the mid 2000s' . And next week it's taking me from home in Burnaby ,B.C to the national rally near Fossil ,Oregon !
ps: the handlebars are made from 2" exhaust pipe
!
ps: the handlebars are made from 2" exhaust pipe
AlwaysOnAuto
Well-known
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.