Canon LTM Wanted: Dummy's guide to removing top of Canonet 28

Canon M39 M39 screw mount bodies/lenses
I

iggers

Established
Local time
1:08 AM
Joined
Feb 2, 2005
Messages
143
I just received a Canonet 28 with a non-responsive meter. I would like to remove the top, in order to peel off some vinyl, remove a front panel and clean the contacts at the upper right. I've never removed the top before. There are three screws, as well as the winder and rewind cranks that I assume have to be removed. Can someone point out what's involved?
 
iggers said:
I just received a Canonet 28 with a non-responsive meter. I would like to remove the top, in order to peel off some vinyl, remove a front panel and clean the contacts at the upper right. I've never removed the top before. There are three screws, as well as the winder and rewind cranks that I assume have to be removed. Can someone point out what's involved?
Click to expand...

Igger

Before you dive into it, have you cleaned the battery compartment (Vinegar rubdown)? It may be as simple as that.

Russ
 
Sorry about the duplicate posts, asking this question

Sorry about the duplicate posts, asking this question

Thanks.

BTW: I did not mean to post this query twice. After I posted it once, I checked to see whether there were any responses, and could not find it. So I posted it again. Now I see the original post (this one) is here after all. Sorry about that.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom