John Shriver
Well-known
No harm is done by setting the shutter speed on a Leica or Canon RF with a spinning shutter dial before cocking the shutter. But you also don't have a pointer to set it by, so it's a bit tricky.
The IVSB2/IID2/IIF2/IIS2 series from Canon have a pointer in the center of the dial, so you can set it cocked or uncocked. They also have better viewfinders. They also cost a good bit more.
The IVSB2/IID2/IIF2/IIS2 series from Canon have a pointer in the center of the dial, so you can set it cocked or uncocked. They also have better viewfinders. They also cost a good bit more.
back alley
IMAGES
again, thanks guys!
i am anxiously awaiting arrival of either/both of these cameras.
don't know why but i'm thinking i'm really gonna like using them.
joe
i am anxiously awaiting arrival of either/both of these cameras.
don't know why but i'm thinking i'm really gonna like using them.
joe
kabkos
Established
You asked about cutting the film leader to a tapered shape in a earlier post. On my Canon III, I don't bother to cut the leader. I have used home loaded film cartridges with the leader cut straight across. Just when loading film I set the shutter open on "T" and with the lens off I help the film into position with my finger. The reason the original film leader needed to be cut to a 4" taper was in order to get the film to lay right before it went past the pressure plate. Helping the film into place with my finger relieves the pressure plate tension. Try it when you get your new toys, you may find it is easier than fussing with a tapered leader.
back alley
IMAGES
i have read both ways work but some people have pretty strong views on each of their ways.
being basically a lazy kinda guy, i'm thinking that cutting the leaders off a few films at a time would be easier than removing the lens and fiddling around in there.
with my recent track record i'm afraid of dropping the lens
i'll likely try both at first.
joe
being basically a lazy kinda guy, i'm thinking that cutting the leaders off a few films at a time would be easier than removing the lens and fiddling around in there.
with my recent track record i'm afraid of dropping the lens
i'll likely try both at first.
joe
xayraa33
rangefinder user and fancier
I use a IVSB and its improved close relative , the IIS2, even with the slightly "less" squinty viewfinder and "set at any time" top shutter dial of the IIS2, I kind of prefere the IVSB. I do not know why really.... Maybe I find the "2" series were not improved enough IMHO (certainly , to justify their higher cost in todays market). Twentyfive years ago both models were moderatly priced used" old" cameras, with not much price difference between a "2" or a non "2" bottom loader Canon in equal condition.