Which E6 kit for use with Jobo CPE-2?

[Nomad Z]

In a few days, I should take delivery of a Jobo CPE-2 Plus processor (with the lift thingy). So far as I can tell, this processor is conducive to a process that uses up to four baths (or four that can be temperature controlled to be more exact).

I already have Fuji Hunt C41 chemicals, and would like to add E6 so that I can process 120 Velvia 100F. I'm leaning a little towards the Fuji Hunt 6-bath E6 kit, but I'm not sure if I can use this readily with the CPE-2.

Aside from something that is straightforward to use and produces consistent results, I would like reasonable shelf life of part used chemicals.

Suggestions?

 

[sevo]

Fuji Hunt will do. The Tetenal kits are fine as well, easy to use and more affordable (at least if you are in Europe). That said, 3-bath is not up to 6-bath if you have a well calibrated process running in a permanently attended ATL. But in manual processing (or if you own no transmission densitometer/cannot afford fresh Fuji or Kodak text strips), the deviations introduced by using 3-bath rather than 6-bath fall back behind the inevitable inconsistencies of the operator...

 

[Nomad Z]

Thanks sevo. What are the various kits like for shelf life once they have been mixed? (I'm assuming mixing 1L of each of the working solutions.)