:bang: I've got this Contina III with Pantar 1:2.8. Works fine, except distance setting ring is soooo stiff. Almost unusable. Is there something I can do, lubricating?
Please help.
Thanks!! solo
I have a Contina II with an Opton Tessar lens that has a very stiff rangefinder/ distance knob (the dial on top right).
I just guess the distance and set the lens distance ring accordingly and it works fine.
The quality of the lens is incredible- right up there with my contax 11a lenses.
I should use it more...
happy snaps!
Thanks guys! Mine (III) has detachable front lens. Under the lens, I see 4 little screws. Maybe I should try taking them out and see what's there. I am afraid I can damage shutter spring or something which is intact.
Thanks guys! Mine (III) has detachable front lens. Under the lens, I see 4 little screws. Maybe I should try taking them out and see what's there. I am afraid I can damage shutter spring or something which is intact.
No, I took mine out, no problems there. But my focus was stiff as well, and I never did quite figure out how to fix it. It is in the lens, though. When I put my 75mm or 35mm cells on the Contina III, they turn nicely.
By the way - sad to say, but I'm somewhat disappointed with the overall quality of the Pantar lens compared to the Contina IIa with the Novar Anistigmat. Three-element versus four-element tessar clone, I guess. But I thought it would be a bit nicer.
You were correct! It was not the camera, but the Pantar lens itself!
I took the screws out but there were no moving parts what so ever. And I took the Pantar lens apart. Boy, a ton of gunk in it! Putting those back took a little while and distance is still a question, so I need to test it. Anyway, what an experience and thanks for your advice!! solo
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.