Zorki 4 - Audacity shutter test

mszargar

Established
Local time
12:17 AM
Joined
Aug 28, 2012
Messages
197
Hello,

I have just bought a 1966 Zorki 4, and since I don't have a CRT monitor at home, I have tried to test the shutter speeds using Audacity audio recorder, measuring the time between the first sound peak related to shutter opening and the first sound peak related to shutter closing (fpofpc). For faster speeds I have measured the time between the last audio peak related to opening and the first audio peak related to closing as well (lpofpc).

These are the results all in milliseconds:

Speed Indicator (Correct Speed) = fpofpc (lpofpc)

1 (1000) : 680
2 (500) : 360
4 (250) : 206
8 (125) : 134
15 (62.5) : 77
30 (31.3) : 43.8 (41.3)
60 (15.6) : 21.65 (19.15)
125 (7.8) : 6.7 (5.9)

Obviously for 250 and above this method is useless.

I know this is not an accurate method, but do you think these are acceptable results for this camera, given that I will never really use any speed below 15? Is there anything I can do to improve the accuracy of the shutter?

Thanks in advance...
 
Well, the biggest thing is consistency over accuracy, like if you run the test 10 times, are the speeds roughly the same every time... It's a little odd that the slow speeds are faster than they're supposed to be, but yours, in general, are pretty close to halving/doubling correctly.

Film is pretty flexible - I wouldn't really worry about it, especially if you don't use the slow speeds too often (I rarely do anything less than 1/15, but occasionally).

If you use a meter, just adjust accordingly. I doubt your shots will come out too differently.
 
Well, the biggest thing is consistency over accuracy.

This is very true and I had never thought about it (being from DSLR generation I assumed that inconsistency SHOULD NOT exist! lol). Now that I test, I see there is some variation, but given the forgiving nature of the film, I think the variations are negligible.
 
this is a really interesting idea, i was wondering how to test this myself. if i test my '68 fed 4 with this method i'll post the results
 
Welcome to the forum.
One of the issues we see regularly posted (and often images which show the problem, but not recognised) is one of uneven exposure across the frame or a dark/unexposed strip on the film.
U2857I1251710537.SEQ.0.jpg

One frame taken right way up, one with camera inverted.

U2857I1276007814.SEQ.0.jpg


Most would hope for an even exposure regardless of speed accuracy. Hope yours will be free of these issues.


Dave
 
Hello again,

Thanks for all the replies...

I had my first roll of film developed, and it seems to be free of any serious anomaly or unwanted artefact. Actually, I am rather surprised by the results, because the only shot that is badly exposed in the whole roll, is the one that I have taken with the lens cap on! As somebody used to a dslr, I would say I am in a dynamic range shock right now (and this, despite having used an expired low-end film and a cheapo cheapo scanner).

I am going out to take more photos today and I will take some notes and make comparative test shots with my dslr to further satisfy my curiosity...

I post some photos from this first roll, just to share my joy with you...

(Kodak GC 400 expired on Zorki 4 - Jupiter 8)

Mah
 

Attachments

  • 31710006-6 1.jpg
    31710006-6 1.jpg
    141.8 KB · Views: 0
  • 31710015 1.jpg
    31710015 1.jpg
    110 KB · Views: 0
  • 31710020 1.jpg
    31710020 1.jpg
    47 KB · Views: 0
Last edited:
Thank you Richard G, fidget and Ron for your kind words.

I have a hard time framing my photos using the Zorki 4. I am through my third roll of film but I am still unsure of what I am including in the photo and what I am excluding from it, due to lack of frame guides in the viewfinder.

Can you explain to me how the borders of my final photo relate to the borders of the image I see in the viewfinder (sorry if my questions is very SLRish, but this is really my first rangefinder)?
 
Thank you Richard G, fidget and Ron for your kind words.

I have a hard time framing my photos using the Zorki 4. I am through my third roll of film but I am still unsure of what I am including in the photo and what I am excluding from it, due to lack of frame guides in the viewfinder.

Can you explain to me how the borders of my final photo relate to the borders of the image I see in the viewfinder (sorry if my questions is very SLRish, but this is really my first rangefinder)?

The whole viewfinder is about what you should get on the pictures if you work with a 50mm lens, no need for framelines unless you would like to use a 85 or 90mm lens. There is very nice FSU turret viewfinder made by KMZ which you can attach in the flash mount and which will provide nice views for the different lenses.
Clockwise, starting with the longest viewfinder element, these are the Russian lenses you might wish to use the finder with....
13.5 cm (Jupiter-11, 135mm f/4)
5 cm (Jupiter-8, 50mm f/2)
2.8 cm (Orion-6, 28mm f/6)
3.5 cm (Jupiter-12, 35mm f/2.8)
8.5 cm (Jupiter-9, 85mm f/2)
1.jpg
 
Hello Again Ron,

Apparently my viewfinder works in a very highly approximative way. I miss a lot on two sides of the frame. Any shot framed in a symmetric way comes out chopped on left and top. Please see the photo attached. I am sure I never frame anything like that. Is there any way to fix this, you think? I like the turret finder but I also like to be able to take my camera out without the external finder.

Mah
 

Attachments

  • 32940021 copy.jpg
    32940021 copy.jpg
    102.6 KB · Views: 0
Hello Again Ron,

Apparently my viewfinder works in a very highly approximative way. I miss a lot on two sides of the frame. Any shot framed in a symmetric way comes out chopped on left and top. Please see the photo attached. I am sure I never frame anything like that. Is there any way to fix this, you think? I like the turret finder but I also like to be able to take my camera out without the external finder.

Mah

Hello Mah, what might be the case here is that the top of the camera is not precisely matching with the position of the view/rangefinder. This can be caused by an exchange of the top of the camera with that of another. I have seen a Zorki 4 where the viewfinder hole in the topcover did't match the position of the view/rangefinder. You can check easily if that is the case with your camera too.
 
You can check easily if that is the case with your camera too.

How can I do that? As far as my untrained eyes can see, the viewfinder is well-centered in its frame. Plus, the rangefinder works perfectly and the focus area is right in the middle of the viewfinder... But is there any more specific technique to check this?

This can be caused by an exchange of the top of the camera with that of another.

I don't reject the fact that this can be the case here (these are rather old instruments, and people may have done anything to keep them alive over years). But I don't give it a high probability either, because my copy is a rare export version produced only in 65-66 and all the details of the body correspond with that. The serial on the main body is 66, the leatherette seems to be of the correct type, all the scripts are in English and engraved on top body and the lens serial number is 66 as well. Maybe it is just too perfect to be true...
 
Hello Ron!

I just found out this is the normal parallax error of Zorki 4, that becomes much more visible at the closer distances. Apparently one has to use a parallax-corrected viewfinder with Zorki 4 to simulate the right framelines...
 
So far, so good! Except the newbies' parallax-paralysis with antique rangerfinders, everything is going well with my new camera. Here are some shots from my second roll of film (Fuji Proplus II 100 - Expired in 1999).







 
mzargar: two different turret finder exist. For the FED/Zorki and for the Kiev. They are practically mirrored. If you use the wrong type you have horizontal parallax.
 
Back
Top Bottom