Zorki 4 film advance winder

[vass72]

Hi, i got a zorki 4, and the film advace winder is quite hard to turn. I removed the top and cleaned the top mechanisms with lighter fluid, without messing the view/rangefinder or the curtains. Unfortunately, i didnt see any difference. It is still as hard to turn. If i lock down the shutter button then it turns very easily as isolated. So i conclude that something else is causing it.


Any ideas?

 

[tbhv55]

Hi, i got a zorki 4, and the film advace winder is quite hard to turn. I removed the top and cleaned the top mechanisms with lighter fluid, without messing the view/rangefinder or the curtains. Unfortunately, i didnt see any difference. It is still as hard to turn. If i lock down the shutter button then it turns very easily as isolated. So i conclude that something else is causing it.


Any ideas?

You might want to read this thread, on here. (Post #2, in particular)


Welcome to the forum, BTW.!

 

[vass72]

thank you, did this, but didnt see any different. it cocks ok, but it is hard to turn. it is like this all the way.

 

[tbhv55]

thank you, did this, but didnt see any different. it cocks ok, but it is hard to turn. it is like this all the way.

I'd be inclined to see whether Wolves3012 happens along, into this thread. There are others, too, who might be able to advise; RFF has wide-ranging expertise.