Adapter for HANIMEX lens?

[Pancake]

Hi all
Does anyone have any idea what adapter I would need for this lens
(HANIMEX AUTOMATIC MC 1:2.8 f=28mm) to fit my GF2 ? I think it could be a Pentax K mount. It's a Bayonet fitting.


Thanks for any help.

 

[Pancake]

More pics 🙂

 

[Nickfed]

Not a PK. None of the pictures are clear but the red dot is very evident at about 180 degrees from the iris control. On the PK it is a little less than 90.

Picture shows red dot at the start of a bayonet tongue. Diafragm release in the background and the meter coupling lever just visible in the curved slot in the foreground.

 

[Pancake]

Not a PK. None of the pictures are clear but the red dot is very evident at about 180 degrees from the iris control. On the PK it is a little less than 90.

Picture shows red dot at the start of a bayonet tongue. Diafragm release in the background and the meter coupling lever just visible in the curved slot in the foreground.

Thanks for reply
It aint a C/Y mount either (bought a CY adapter and wedged it in that 😀 and with a bit of tape it works ok) So still not sure what mount it is. Oh well all good fun and it was very cheap😀

 

[Greyscale]

I think that that is a Praktica "B" mount.