davidcreede
Newbie
What i really want to do is use infrared film in my Bessa L, with the 15mm heliar. And i wat to use a filter to block the blues&UVs. Has anyone done this? what did you do? how did it turn out? is there an adapter for using a filter? Can one attach a filter on the rear of the heliar? Did you just put celophane over the shutter frame?
Any advice or comments are welcome.
dave
Any advice or comments are welcome.
dave
John Robertson
Well-known
You can use the 12mm filter adaptor. I ordered one from Cam Quest. Inside there is a narrow spring with a locating tag on one end, take note how it fits!. Carefully lift this out. Slip a length of electricians shrink cable covering over it, (choose a size which is a tight fit ) leave about 1/4 inch uncovered at both ends. Apply gentle heat with a cigarette lighter to shrink tightly in place, Replace spring locating the tag in its slot. It now should fit the 15mm without having to resort to sticky tape. I now use mine with a IR filter.
chug
I wear pants
Good tip
Now here is my question: Does that filter adaptor help to reduce a bit of lens flare at all?
Cheers
Cheers
John Robertson
Well-known
Hi Chug, my own 15 is not prone to flare at all without a filter, and using this arrangement so far has not introduced any. I did however have problems when previously I used Cokin filters held in place with tape!
P.S. your avtar looks like me when I used a digital camera recently!!
)
P.S. your avtar looks like me when I used a digital camera recently!!
chug
I wear pants
*chuckles* Id say my avatar looks like me when I am hungry
Cheers for the info 
Gabriel M.A.
My Red Dot Glows For You
You can use the 12mm filter adaptor. I ordered one from Cam Quest. Inside there is a narrow spring with a locating tag on one end, take note how it fits!. Carefully lift this out. Slip a length of electricians shrink cable covering over it, (choose a size which is a tight fit ) leave about 1/4 inch uncovered at both ends. Apply gentle heat with a cigarette lighter to shrink tightly in place, Replace spring locating the tag in its slot. It now should fit the 15mm without having to resort to sticky tape. I now use mine with a IR filter.
Hmmm. Interesting.
thefsb
Established
which IR filters/films are y'all using?
Share: