Any DR Summicron and M6/TTL users out there ?

[raytoei@gmail.com]

Hi,

I have heard of DR Summicron and M6/TTL issues, especially when goggled. I have searched this forum but found nothing out of the ordinary.

Any DR Summicron / M6 users out there ?

thanks

 

[WalterM]

isnt the problem because the m6ttl and later models are slightly taller?

 

[furcafe]

Yes, the combo works, it's just that you may need to 1st remove the little plastic "ledge" that's above & to the right of the "Made in Germany" inscription on the goggles (it should unscrew from the front).

 

[jordanstarr]

What issues? I have a DR without goggles and haven't had a problem.

 

[Rob-F]

What issues? I have a DR without goggles and haven't had a problem.

That's why you don't have a problem. There is a tiny part on the goggle that rests on top of the M3, M2, M4, and M6 classic. It has to be removed so it won't foul on the higher top plate of the TTL and M7. No goggle, no problem! 🙂

 

[jordanstarr]

...I was just assuming it was a image rendering problem rather than something mechanical. I must have also missed the "especially when goggled" part, when my brain momentarily shut down.