JTK
Established
One of my P is crudely engraved, back and bottom. Otherwise, very nice. Might like to give it a CLA and a paint job.
Who does that in the US?
I read somewhere that an epoxy paint was best.
Is this a ridiculous idea?
Who does that in the US?
I read somewhere that an epoxy paint was best.
Is this a ridiculous idea?
Bill58
Native Texan
If you are gonna keep it a long time, why not get it painted and enjoy it every day? Makes sense to me. One of our own members in the USA might be persuaded to to it: http://www.digitalintrigue.net/Welcome.html
januaryman
"Flim? You want flim?"
Funny, I thought the same and asked the guy if he did Canon Ps. He said he'd never tried it and wasn't sure how complicated it might be. I figured ... eh. I'll leave it.
Bill58
Native Texan
I think you may have slightly misunderstood him. He just said he'd try my Canon L1 and it's just like the Model P in terms of dissasembly (in other words easy). However, he's just a little reluctant to name a price on any camera unless he's actually done one of that make/ model or at least seen one in person. That's very normal for his "profession" or any other contractor/ repairperson.
W
wlewisiii
Guest
No, I don't think so.
OTOH, I own a 1937 Contax III. It has the usual nonfunctional meter lump on top of the camera that, I believe, seriously detracts from the camera's appearance. As a result, I've located a trashed Contax II that is being parted out and have purchased such bits as will allow me to turn my Contax III into a (to my eyes) much more attractive, and user friendly, Contax II.
There are three important considerations here. First, the camera in question, for both of us, is not especially rare. There is no history being destroyed by making these changes. Second, at least in my case, I intend to keep all the origional bits in a package for future reference, Finally, I intend to keep and shoot this camera for the rest of my life. I am as passionate about the Contax series as most memebers of RFF are about Leica so this is not much of a surprise. Given these considerations, I don't consider my alterations to my camera to be "ridiculous". Similarly, I don't think that your alterations need to be that, either.
I hope this is of some help,
William
januaryman
"Flim? You want flim?"
Yes. I understood it like that, too. I can see how he'd need to see it; but after some due consideration, I decided to leave well enough alone. His work is wonderful, but I'll wait. Maybe later. Maybe not. That's all I meant.
Bill58
Native Texan
raid
Dad Photographer
Is a black paint Canon P worth more? How much more? 10% 20% 30% ... ?
dexdog
Veteran
Based on what I have seen on eBay, an authentic black paint P would probably sell for 5 to 10 times as much as a standard chrome model.
This would not apply to repainst, such as the one currently listed on eBay that has nice shiny chrome showing through the worn paint. At least the seller is claiming that it is authentic.
This would not apply to repainst, such as the one currently listed on eBay that has nice shiny chrome showing through the worn paint. At least the seller is claiming that it is authentic.
januaryman
"Flim? You want flim?"
Dexdog's estimate agrees with my thoughts. And experience of "losing" on ebay after posting what I thought was a more than reasonable price for a Black P a few weeks or months back. I think it went for about 2 grand. hmmm... nothing wrong with chrome, I always thought.
raid
Dad Photographer
Hi Mark,
The ebay seller is saying that it is most likely a black repainted Canon P,so he is being frank about it.
How much more is a repainted P worth as compared to same condition chrome version? I guess, I am after the value of a used repainted P.
Also, how would I go about repainting the flaked off parts of a repainted camera?
Last edited:
raid
Dad Photographer
This is a price list for Shintaro:
This price is for Leica.
1 $500US just paint on the brass.
I do not paint eyelet's and flame at back door.
It is good for the camera which is mint condition or owner doesn't care about scars.
2 $600US Fix dents or dings then paint on the brass.
I do not paint eyelet's and flame at back door.
It is good for the camera which has dents or dings but has good leather.
3 $700US Fix dents or dings then paint on the brass and change leather
This price is for Leica.
1 $500US just paint on the brass.
I do not paint eyelet's and flame at back door.
It is good for the camera which is mint condition or owner doesn't care about scars.
2 $600US Fix dents or dings then paint on the brass.
I do not paint eyelet's and flame at back door.
It is good for the camera which has dents or dings but has good leather.
3 $700US Fix dents or dings then paint on the brass and change leather
Bill58
Native Texan
I've found a guy here in Korea, who's as good as Shintaro and will do a paint job for $300
w/ no dent repair. I'm getting my Model P done now in "Army Green." Changing the covering to match paint is $100.
w/ no dent repair. I'm getting my Model P done now in "Army Green." Changing the covering to match paint is $100.
raid
Dad Photographer
Bill58
Native Texan
OK, Raid........ what did you pay for it? Touch up? I'd leave it alone. A nick is better than a big glob of touch-up paint, even if you find a sheen match.
BTW--it's sweet!
BTW--it's sweet!
raid
Dad Photographer
Bill,
I paid $360 shipped from Japan. The seller states that there are no wrinkles in the shutter curtain. This is a good sign.
Once I see the camera for real, I may love how it looks and keep it as is it.
I paid $360 shipped from Japan. The seller states that there are no wrinkles in the shutter curtain. This is a good sign.
Once I see the camera for real, I may love how it looks and keep it as is it.
Bill58
Native Texan
raid
Dad Photographer
Bill,
Mine has many paint flaking, so it is not as nice looking as a newly painted one like the camera you will be having.