Black Paint hood 12504

A

alice

Established
Local time
7:16 AM
Joined
Jul 11, 2005
Messages
86
can the BP version of hood 12504 (the one that comes with BP 35/2 asph) be unscrewed to take series 7 filter?? :bang:
 
12504

12504

hi alice
i've never seen the BP version of 12504, but on the normal version, i believe you can see either a little bit of the thread between the two halves or some indication of the division between the two parts. have you tried holding the filter in both hands (camera side in one hand, vented shade in the other), and turning gently counterclockwise?
good luck
rick
 
Rick, i have the pre-a 12504 and can unscrew it to take series 7 filter, just not sure if the BP version is the same....thanks!
 
Rob-F said:
That really surprises me! There would seem to be no reason to compromise the utility of the hood by making it impossible to use filters. What were they thinking?
Click to expand...

The BP 12504 was made for the 35/2.0 that has an E39 filter thread so no need to use series vii filters. (Expensive, difficult to get and increased flare due to the larger distance between filter glass and surface of front element).
 
I too own a copy of this hood and my experience is the same as Erik's. It does not appear that it was designed to unscrew to accommodate a series filter. Having since gotten a copy of an earlier version and discovering it's utility, I came to the same conclusion that Gabor describes. I belive the hood was designed specifically for the black paint version of the ASPH Summicron.
 
thanks for the responses, i asked because i wanted to use the BP hood for my titanium lux pre-a as opposed to the flat black hood. but at the same time i want to house the series 7 filter in it
 
You must log in or register to reply here.
Back
Top Bottom