color skopar 28 with LH-1 ?

[24mgdriver]

I will buy a LH-1
( http://i4.ebayimg.com/06/i/001/48/92/183b_12.JPG )
from Voigtaender for the old
Voigtlaender color skopar 28mm 3,5 like this

http://www.voigtlaender.de/cms/voigtlaender/voigtlaender_cms.nsf/gfx/28mmSkoparSilber.JPG/$file/28mmSkoparSilber.JPG

Voigtlaender says the LH-1 is for the 21 m / 25mm and 28mm Lens
so i think it must be this 28mm lens from voigtlaender, right ? The other one is the 1,9 28mm had had another lens hood.

so, tell me if i'm right ;-) thanks

michael

 

[Nikon Bob]

The LH-1 fits lenses with a 39mm filter thread so it should work with the 28/3.5 as the other CV 28s have 46mm filter threads.

Bob

 

[craygc]

Its the right one. I have it on my vc 28mm color skopar as well

 

[24mgdriver]

Thanx for the information. Could you see the hole 28mm picture thrue the
rd-1viewfinder or must i have an extern one ?

 

[.ken]

the LH-1 is okay lens hood but finding a cap that fits it seem to be an issue... it's not the easiest to get on and off... I'd prefer to use a round "vented" metal hood for much cheaper.

 

[24mgdriver]

Any ideas for a vented round lense hood for the color skopar 28 ?
Where i could get one ?

 

[Nikon Bob]

the LH-1 is okay lens hood but finding a cap that fits it seem to be an issue... it's not the easiest to get on and off... I'd prefer to use a round "vented" metal hood for much cheaper.

No problem with that. Made my own from some thin black plastic and using heat molded it to shape. Just slides on and off. May not be much to look at but it works well enough.

Bob