john341
camera user
I have just bought one of these loaders and while I am waiting for its arrival, I wonder if anyone has user instructions for this machine?? Mine is arriving without info so if any of you..... I would appreciate it 
ChrisN
Striving
I had one - it was pretty easy to work out what went where. Good luck!
Fred
Feline Great
I have a copy, If I remember I can PM you a scan.
john341
camera user
Thanks, Fred that would be great!
astroman
-
Ive never seen one of these.
More info please!
More info please!
john341
camera user
Computrols were made in Israel (!) but later models were produced in the UK. You will find them on you-know-where dot co dot uk at very reasonable prices and my experiences with that site are all positive. JB
Seele
Anachronistic modernist
I remember the Computrol well, when living in the UK, it was sold under the Barfen label along with many darkroom gear and materials, a house-brand of a retailer. However I prefer the Watson, and I still have two, one a very late model and the other an original B&J bakelite one.
One tip: do not use regular Sellotape for attaching the film end to the spool shaft, use a half-inch wide masking tape, and leave a small gap between the shaft and the end of the film, this would prevent the film edge from riding up the spool flanges.
One tip: do not use regular Sellotape for attaching the film end to the spool shaft, use a half-inch wide masking tape, and leave a small gap between the shaft and the end of the film, this would prevent the film edge from riding up the spool flanges.