lorenzo1910
Established
There is for sure with M39 thread mount and the seller says that it's for Fed and Zorki RFs...
Have a look here: http://cgi.ebay.it/INDUSTAR-50-blac...ViewItem&pt=Camera_Lenses&hash=item563d7cf965
@konicaman: I will develop next roll of Fomapan 100 in Rodinal 1+100 stand....You will see the results here
Have a look here: http://cgi.ebay.it/INDUSTAR-50-blac...ViewItem&pt=Camera_Lenses&hash=item563d7cf965
@konicaman: I will develop next roll of Fomapan 100 in Rodinal 1+100 stand....You will see the results here
Last edited:
pakeha
Well-known
thanks for link, i will get some in
we off course felt good with a once in 30 year result
regards
CW
Uwe_Nds
Chief Assistant Driver
There is for sure with M39 thread mount and the seller says that it's for Fed and Zorki RFs...
Have a look here: http://cgi.ebay.it/INDUSTAR-50-blac...ViewItem&pt=Camera_Lenses&hash=item563d7cf965
@konicaman: I will develop next roll of Fomapan 100 in Rodinal 1+100 stand....You will see the results here
Yes, that one (I-50 and not 50-2) definitely looks like an M39-lens.
Cheers,
Uwe
paulfish4570
Veteran
Absolutely, the I-50 (Leica screwmount/m39) would be a dandy for you. It is a very simple lens that gives a wonderful look. One should not cost much, but shipping may cost more than the lens itself ...
I-50-2 is m42, and uses the same optics module as the I-50 ...
I-50-2 is m42, and uses the same optics module as the I-50 ...
je2a3
je
Beautiful pictures Lorenzo!
lorenzo1910
Established
It seems that a 50-2 has been made also in M39 for RFs...
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=320539238534&ssPageName=STRK:MEWAX:IT
(edit) or at least the rear side of the objective looks fine for the RFs cam... (No arguments here,just trying to understand...)
Many thanks je2a3 glad you like them!
http://cgi.ebay.it/ws/eBayISAPI.dll?ViewItem&item=320539238534&ssPageName=STRK:MEWAX:IT
(edit) or at least the rear side of the objective looks fine for the RFs cam... (No arguments here,just trying to understand...)
Many thanks je2a3 glad you like them!
Last edited:
Arvay
Obscurant
Probably this http://www.zenitcamera.com/archive/lenses/industar-50.html would be of help. It is in Russian but on the left you can see two Industars: the upper - for rangefinder^ the lower - for M42.
In the text there is the following :
Индустар(Industar) - 50 -- M39x1
Индустар-50-2 -- M42x1
You can look through these pages. Few of them have English versions but a lot of talking pictures there. The main advantage of them is that these are official pages of Krasnogorsk factory (Zenit)
In the text there is the following :
Индустар(Industar) - 50 -- M39x1
Индустар-50-2 -- M42x1
You can look through these pages. Few of them have English versions but a lot of talking pictures there. The main advantage of them is that these are official pages of Krasnogorsk factory (Zenit)
lorenzo1910
Established
Interesting...many thanks Arvay...an official page from Zenit manufacturers...never tought this could be (still) alive...
What do they produce at the moment?
What do they produce at the moment?
Last edited:
Arvay
Obscurant
They say Horizons
for Lomography society exclusively
and
as well as fisheyes Zenitar 16/2.8 for M42, Nikon F and Pentax K mount according to the info on the page.
Film cameras production was stopped in 2005 exept panoramic. They are not too bad (I have one