Fitting IR cut filter and hood to 35 Summaron?

[johnastovall]

I just got a near perfect 35mm 1:35 Summaron but can not figure out how to rig an IR cut filter on it and a screw in hood. It looks like it takes a slip on filter and original hoods are almost as much as I paid for the lens.

What sorts of parts should I be looking for?

 

[spikey]

I use the filter and hood from my 50m elmar

I use the filter and hood from my 50m elmar

the e39 fits on my (non goggle, made in 1953) summaron 35mm f3.5 ...

 

[johnastovall]

the e39 fits on my (non goggle, made in 1953) summaron 35mm f3.5 ...

This is a 1950 LTM and takes the A36 filters.

 

[yossi]

This is what you need: SOOGZ - a Leitz A36 to E39 adapter. Once in a while it shows up at that Bay:

 

[johnastovall]

Thank you that's it...

 

[Ben Z]

Watch out. There are (at least) 2 versions of that adapter. One has a groove cut around the outside that a clip-on vented shade (made for the M-mount 35/50 lenses) will attach to. The other version doesn't. How I know? I ended up with one of each, and had to cut a channel around the one so I could attach a hood.

 

[johnastovall]

No problem, I got the un-grooved but plan to use an E-39 screw in hood from HeavyStar in the IR-cut filter. I really don't like clip on shades. I use this arrangement on several of my old Leica lenses.