Beemermark
Veteran
HELP! I have a Fuji GW670III and am leaving on vacation tommorrow and don't know how to load 220 film. I'm certainly not new to this camera but I rarely, if ever, shoot 220. I've never shot it in this camera. I loaded the film, set the switch on the top deck to 220 but then noticed the pressure plate has an arrow and is labeled 120. IS the pressure plate supposed to rotate or change position in some other manner to make up for the lack of a paper backing?? I certainly can't figure it out. I also can't find the manual.
Meleica
Well-known
See my Fuji page for the 670II manual which will load the same way..
http://members.aol.com/dcolucci/fuji670.htm
Dan
http://members.aol.com/dcolucci/fuji670.htm
Dan
Tuolumne
Veteran
Perhaps I am just dense. I have one of these cameras and looked at the figure in the instruction manual that says you have to use the 220 side of the back on 220 film, but I was none the wiser on how to bring the 220 side into the correct position. Everything on the back plate seems quite firmly attached. How exactly is one to do this?
/T
/T