smage85
Newbie
More likely a problem with the lab.
Pressure plate scratched are usually going to occur through the entire roll as fine lines. Try another roll and a different lab.
Inspect the plate of course before loading film.
If it is perfectly smooth it's probably not the issue.
Nice images btw 🙂
That's quite comforting to know. I will renew the light seals anyway, as the condition of the old seals do look disgusting 🙂
Not to go offtopic, here is one more picture from the test roll (it also has the same scratch pattern although this time I think the pattern adds to the photo rather than subtract from it)
