weetsie
Member
took me many months but i finally managed to get it working.
ok so here it is, the hexar AF custom battery grip mk1:
it features a 2300mah 11.1v lithium polymer battery offering 250% more capacity than the original. (in reality it self discharges faster than the camera can actually draw power)
the dc-dc converter is capable of accepting any dc power ranging from 3-38v so you can run or charge the camera off anything from a cell phone charger to a car battery and without any external charger (tiny crocodile clips are tucked inside the battery compartment)
apart from increasing the susceptibility to weather damage, increasing the size and weight, decreasing the battery life, increases the change of you blowing your camera by an irregular input, covering the tripod mount, stopping the camera back from opening and removing any stealth ability it does actually give you another place to put your hand if you find you cover the AF beam 😀
so if anyone is intrested in making one for themselfs let me know and ill make a step by step build guide, should cost around $30 + some tape for attachment.
ok so here it is, the hexar AF custom battery grip mk1:
it features a 2300mah 11.1v lithium polymer battery offering 250% more capacity than the original. (in reality it self discharges faster than the camera can actually draw power)
the dc-dc converter is capable of accepting any dc power ranging from 3-38v so you can run or charge the camera off anything from a cell phone charger to a car battery and without any external charger (tiny crocodile clips are tucked inside the battery compartment)
apart from increasing the susceptibility to weather damage, increasing the size and weight, decreasing the battery life, increases the change of you blowing your camera by an irregular input, covering the tripod mount, stopping the camera back from opening and removing any stealth ability it does actually give you another place to put your hand if you find you cover the AF beam 😀
so if anyone is intrested in making one for themselfs let me know and ill make a step by step build guide, should cost around $30 + some tape for attachment.
