Hood for old Emlar 50

[arthur2]

Hi everyone,

For some time now I have been looking for a lens hood for my Elmar 2.8/50 lens on my Leica M2. Does anyone know which is the right hood for this lens?

I have also found an M2 + Elmar 50 offered on German eBay that comes with a hood, maybe someone can identify it from the article description. I have contacted the seller but received no reply... Here's the link: http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&rd=1&item=3857021246&ssPageName=STRK:MEWA:IT

Thanks in advance for your help,

Arthur

 

[arthur2]

Hi Bob,

Thanks a lot! That's a lot of money for a round piece of metal, though... Maybe I can find one in less than mint condition a little cheaper.

 

[rover]

Steve Gandy has an alternative listed on his Cameraquest site.

http://www.cameraquest.com/inventor.htm

 

[rover]

here is a better link

http://www.cameraquest.com/frames/4saleLeica.htm#NEW Metal Hoods for Classic Leica Lenses!

 

[Solinar]

Try this one

 

[Mike Richards]

I use the B+W rubber hood. Works perfectly. Collapses for easy storage.
http://www.bhphotovideo.com/bnh/controller/home?O=productlist&A=details&Q=&sku=11147&is=REG

 

[StreetShooter]

Arthur,

I have a black hood for the 50 Elmar that I'm looking at selling... email me at:

fountainpens AT hotmail DOT com

Cheers

 

[d30gaijin]

Arthur,

While the IROOA/ 12571 will work on the 50/2.8 Elmar, you really don't want one. The chrome band on the IROOA hood extends too far back and makes moving the aperture ring a real pain (unless you have something smaller than baby fingers), and it also covers the small alignment dot that identifies which aperture is selected. There was a very short chrome banded model similar to the IROOA for the 50/2.8 Elmar but they're difficult to find and usually more pricey than a standard IROOA. Get a collapsible rubber hood such as the B&W Mike suggested and save yourself money and grief.

Don

 

[arthur2]

Thanks a lot everyone for your replies. Thanks especially to you, StreetShooter, for the offer, but I live in Europe and I think the shipping cost would be quite high...

I think I'll go with a rubber hood for now, it would have been nice to have an original hood but I wasn't aware they were that hard to find and expensive. After all, I'm not a collector but actually want to use the camera... 🙂 So I think a rubber hood will do.

Thanks again, everyone, and sorry for not replying sooner!

 

[back alley]

come back soon ya hear?

joe