How do you feel about your Bessa?

[ForestCap]

My main mechanical RF was a Canon L2. And now a black Bessa R takes over and I really like the camera. It came with fungus in finder and misalignment RF, however it's fairly easy to clean and adjust.

What surprised me is my Jupiter-12 can be mounted to the R without damaging anything, and it can focus to all distances. The only problem is the rear elements cover the light meter sensor completely so no metering for me.

 

[pvdhaar]

My Bessa-T went in the great camera purge.. every now and then I miss it, despite that the separate viewfinder/rangefinder set up isn't the most practical.

 

[Juan Valdenebro]

My Bessa-T went in the great camera purge.. every now and then I miss it, despite that the separate viewfinder/rangefinder set up isn't the most practical.

Isn´t the most practical unless you find a way to photograph without focusing slowly... HCB used to say he made his best photographs with a Barnack, from the early 30's to mid 50's, and that's the majority of his photography, more than 2 decades of shooting before the M3 was invented, precisely because of a good control of subject distance that makes focusing unnecesary most of the times, unless you use your lens wide open a lot... YMMV.
Cheers,
Juan

 

[pvdhaar]

Isn´t the most practical unless you find a way to photograph without focusing slowly... HCB used to say he made his best photographs with a Barnack, from the early 30's to mid 50's, and that's the majority of his photography, more than 2 decades of shooting before the M3 was invented, precisely because of a good control of subject distance that makes focusing unnecesary most of the times, unless you use your lens wide open a lot... YMMV.
Cheers,
Juan

You do have a valid point there; it's very tempting to ride the focus if you've got an integrated VF/RF. Something that certainly can be a distraction, and can get in the way of composition and timing..

 

[grouchos_tash]

Isn´t the most practical unless you find a way to photograph without focusing slowly... HCB used to say he made his best photographs with a Barnack, from the early 30's to mid 50's, and that's the majority of his photography, more than 2 decades of shooting before the M3 was invented, precisely because of a good control of subject distance that makes focusing unnecesary most of the times, unless you use your lens wide open a lot... YMMV.
Cheers,
Juan

I feel like I more 'in focus' and faster shots with my IIIf than with the M6. I worried less about focus and found the separate Leitz viewfinder for 50mm to be so clear and simple. I'm really considering buying a Bessa T (I sold my IIIf).

 

[superultramega]

I've been using an R for many years, finally moving onto a (NOS!) Zeiss ZM. The R served me well with some minor issues. The film counter plastic window fell out, the backdoor is a mess and I've re-aligned the rangerfinder a few times. But along with (ltm) CV lenses it is a great affordable photo making rig.

I believe I read somewhere it's possible to buy (or strip) a replacement backdoor from other Cosina manufactured cameras. Is that a truth or myth?

Anyway if anyone is looking for a loved but properly functioning Bessa R keep your eyes on the prize in the next few weeks.

 

[ForestCap]

I've been using an R for many years, finally moving onto a (NOS!) Zeiss ZM. The R served me well with some minor issues. The film counter plastic window fell out, the backdoor is a mess and I've re-aligned the rangerfinder a few times. But along with (ltm) CV lenses it is a great affordable photo making rig.

I believe I read somewhere it's possible to buy (or strip) a replacement backdoor from other Cosina manufactured cameras. Is that a truth or myth?

Anyway if anyone is looking for a loved but properly functioning Bessa R keep your eyes on the prize in the next few weeks.

I have an Olympus OM-2000 (bought very cheaply) which was made by Cosina and the back door seems 99% identical to the one on Bessa-R. It doesn't have the rubber coating and looks much neater. I'm thinking of move the OM2000 back door onto the Bessa-R if the original one breaks.

And ye, the film counter window on my Bessa also fell off inside. I re-glued it and put some transparent tape under it to make it secured.

 

[Snapper_uk]

I always got the impression that the Bessas were looked down upon in these parts as the poor relations...

I have an R2a, an R4a and an L and have never felt the urge to use anything else for 35mm.

 

[honozooloo]

One complaint I have is that the shutter mechanism locked a couple of times, the curtains remained open and the shutter release wouldn't work.
...
I heard that when you force the winding lever at the end of a roll that might happen. Unfortunately for me it happened in mid roll both times. I am a little afraid that will occur again every time I use it...

I've had this problem occur with my R3A a few times. Best I can tell, it's happened because the film rewind lever thingy popped out of place a little, and jammed against the camera body in such a way that the advance lever couldn't pull film all the way forward to complete the winding cycle because the jammed rewind lever prevented film from advancing.

Either way, it seems too much resistance from the film when winding causes this problem. This can happen due to a jam or hitting the end of the roll. The last time it happened I was shooting a few frames off in rapid succession on my R3A and didn't check the advance lever before racking another frame with the rewind lever, hard and fast. It made an awful crunch too, yikes!

This issue is my one complaint about the design of the R3A; if you wear your Bessa on a strap across the chest, your rewind lever can snag on your belt or jacket or whatever, and pop out into a kind of "half open" position that can cause a jam.

EDIT: Also, yeah the Bessa feels more like operating a Nikon than a Leica. It's been super reliable and a great camera...just as Nikons are. And with Leica glass mounted to your Bessa you're giving up absolutely nothing to the M in terms of IQ obviously. But yeah, of course the Leica FEELS better in the hands and in use. Are M-cameras that much better? In actual use, I believe not. But in terms of user experience...yeah Leicas feel like Porsches while the Bessas feel more like Hondas. YMMV.

 

[traveler_101]

You do have a valid point there; it's very tempting to ride the focus if you've got an integrated VF/RF. Something that certainly can be a distraction, and can get in the way of composition and timing..

Or combine methods: give yourself a wide field of focus at f8 or f11; frame and shoot - or alternately frame, and if you decide you have time, shift to the RF window, touch-up focus and shoot. But for street shooting or any shooting where speed is of essence, the camera should always be ready to shoot without relying on the RF.

However, I must admit that I find the Leica IIIf better at focusing quickly than my Bessa-T. My Bessa-R with the integrated finder-rangefinder is a different story.

 

[mpaniagua]

My Bessa R2 light meter failed on me last week. First I thought it was weak batteries, but remplaced them already and viewfinder light meter leds won't light or show anything.

Any idea where to get it fixed? Looking at the bay, seems R2 prices had rised a bit (bought mine last year for 250, now there are around $400) so I think it deserve fixing. Great camera and had served me well.


Regards.

 

[traveler_101]

I would start by e-mailing our own "head bartender" and ask if his mechanic would take on your repair.

https://www.cameraquest.com/repairs.htm

 

[gb hill]

Sounds like a job for Flex Seal. Might be good for the Nikon F100, too. Ya-hoo!

Chris

Nah, best to work through it. Wears off pretty quick then it's fine. Flex Seal would probably just do the same if not worse.😀

 

[ForestCap]

Yesterday I compared the bottom plates on OM-2000 and Bessa-R. The OM-2000 (came out 1997) has plastic plates too, but there is a layer of nickel-copper-zinc alloy coated on them. Bending both bottom plates in hand, the one on OM is notably harder, while the one on Bessa-R is so soft that I dare not to bend with more force... Additionally the alloy coating makes the camera looks better and feels better, and the paint does not chip as easy as Bessa. I wonder why Cosina dropped this design on the pre-metal-plates Bessas. Cost Issue maybe.

 

[traveler_101]

Yesterday I compared the bottom plates on OM-2000 and Bessa-R. The OM-2000 (came out 1997) has plastic plates too, but there is a layer of nickel-copper-zinc alloy coated on them. Bending both bottom plates in hand, the one on OM is notably harder, while the one on Bessa-R is so soft that I dare not to bend with more force... Additionally the alloy coating makes the camera looks better and feels better, and the paint does not chip as easy as Bessa. I wonder why Cosina dropped this design on the pre-metal-plates Bessas. Cost Issue maybe.

It's irritating that they didn't spend just bit more and use better materials, though the plastic plates seem less problematic to me than the chintzy rewind lever. It just feels like it is going to break. I am careful.

 

[Solinar]

The Bessa 35mm series filled a niche that was ignored by the larger firms by providing simple camera without a lot of bells and whistles.

For my non-professional needs - the Bessa R - which was adapted from an existing Cosina SLR body - has exceeded expectations.

Purchased used in 2005 for mere couple of hundred dollars, I've only run maybe 40 rolls of film through the camera. The Bessa R - or - my Rollei 35 S are still my go to 35mm cameras when traveling on the road - mainly because I'll be able to find another if they are lost.

 

[traveler_101]

The Bessa 35mm series filled a niche that was ignored by the larger firms by providing simple camera without a lot of bells and whistles.

For my non-professional needs - the Bessa R - which was adapted from an existing Cosina SLR body - has exceeded expectations.

Purchased used in 2005 for mere couple of hundred dollars, I've only run maybe 40 rolls of film through the camera. The Bessa R - or - my Rollei 35 S are still my go to 35mm cameras when traveling on the road - mainly because I'll be able to find another if they are lost.

Well that's right. Losing a Bessa-R, or having it stolen, would not feel like the end of the world - as opposed to having a prized Leica M stolen, lost or damaged. Still that you generally choose the Bessa as your traveling camera over a M2 is boss.

The fact that the Bessa was built on a SLR chassis, as you point out, was presented to me, when I was a newcomer, as an undesirable or less desirable characteristic: "not really a rangefinder" was the refrain.

 

[ChrisPlatt]

In moderate use my Bessa R has behaved well and never malfunctioned.
I'm thinking about getting a Bessa L with 25mm Snapshot Skopar as well.

Chris

 

[KenR]

Primary 35mm camera, but...

Primary 35mm camera, but...

I use my Bessa R2 and R4 cameras as my primary 35mm bodies, but whenever I can, I use medium format. I have Fuji GSW690 and GW690 that I consider my main cameras, but their weight precludes me from taking them on long hikes. When somebody invents an anti-gravity strap I will use the Fujis all of the time.

 

[Gareth Rees]

Still using my R2C without any problems