Keeping track of films in cameras

[drewbarb]

My so far infallible implementation of cutting edge film tracking. I just need a slightly lower tack masking tape.

I do the same (see my post above). The architect's tape is a good suggestion; I use white artist's tape or "paper tape". Available at most art supply stores, it's a low tack acid free tape that doesn't leave residue unless you leave it on long enough to dry out (think years...); it has a matte finish you can easily write on. A little pricey but works beautifully.

 

[curmudgeon]

I bulk load my film in Leica FILCA cassettes. I write the film type and number of exposures, e.g., TMX 100 - 12, on a length of blue masking tape that I wrap around the aluminum can holding the cassette. When I put the film in a camera I remove the tape from the can and put it on the baseplate of the camera. When I finish shooting the film and load it in the stainless developing tank I remove the tape from the camera and put it on the developing tank. After I develop the film I first record the developing info in a small spiral bound notebook and then remove the tape from the tank and discard it.

 

[iphoenix]

Once again with my collection of older cameras I find I can't remember which film is loaded in which. Obviously none of them has that little window or the frame at the back for the film label.

Suffering from early morning brain near dead-ness, I'd love to hear what systems others use to keep track.

Yours only happens in the morning? Lucky you🙂.
A long time ago I was recommended to use "easy peel" price stickers - available in many sizes and shapes. They work well.

 

[CharlesDAMorgan]

Yours only happens in the morning? Lucky you🙂.
A long time ago I was recommended to use "easy peel" price stickers - available in many sizes and shapes. They work well.

The rest of the day isn't so great either!

When the roll of tape runs out I'll see what suits best next. On current rates of shooting vs the size of roll, that will be about a years time.