Kentmere 400, latest samples

45govt said:
Hello Dourbalistar
I was wondering what was your agitation regiment for the L110, I am using HC110 for 5.5 minutes and 1 min. initial and 10 sec. every min. thereafter
Thanks
Don
Click to expand...

45govt, my agitation regimen is not too different than what you're using for HC-110. I use 30 seconds initial and then 3 gentle inversions every minute (basically amounts to about 10 seconds). I have no idea what practical difference 1 minute vs. 30 seconds of initial agitation might make, but hope that helps!
 
dourbalistar said:
45govt, my agitation regimen is not too different than what you're using for HC-110. I use 30 seconds initial and then 3 gentle inversions every minute (basically amounts to about 10 seconds). I have no idea what practical difference 1 minute vs. 30 seconds of initial agitation might make, but hope that helps!
Click to expand...

Thanks
Sounds like its about the same
Don
 
45govt said:
Thanks
Sounds like its about the same
Don
Click to expand...

45govt, I did some more digging and found this article which cites Troop and Anchell's The Film Developing Cookbook:

...if it takes you longer than 5 seconds to fully pour the developer into the tank, then agitate for the first 60 seconds. If you can pour it all in in less than 5 seconds, then a 30-second first round agitation should be enough.
Click to expand...
 
j.scooter said:
Beautiful scene and well captured!
Hopefully you also got a frame with your PentaX-PAN
Click to expand...

Thank you, j.scooter! Unfortunately, I was traveling light(er) and didn't bring my PentaX-Pan for this trip to Joshua Tree. I brought my Rolleicord V for medium format instead.

Nikon FM2n, Nikkor-S Auto 55mm f/1.2, Kentmere Pan 400, developed in LegacyPro L110 at 1:31 for 5.5 minutes.


2022.03.05 Roll #302-07009-positive.jpg by dourbalistar, on Flickr
 
You must log in or register to reply here.
Back
Top Bottom