Konica ii or iii service manual or photographs

[didithevan]

Hi everyone,

I have a Konica ii that I have serviced and cleaned as both the shutter and lens aperture were stuck. All good so far. Disassembled and then re-assembled when I hit a problem. On disassembly there was a small lever that seemed to sit on top of the timer linked to a small holding wire. Somehow this wire has gone (have no idea where as I strip and assemble on a white surface and nothing has fallen). I could really do with a copy of something like the compur service manual,(which I have) but for the konirapid MFX. Any clues or even help with any pictures of a disassembly of this that will help me solve and/or replace this part. I can’t see exactly what this rocker does and compulsion don’t seem to have, neither did Konica i Konirapid guts

 

[JeffS7444]

I wonder if that mysterious part was supposed to prevent the "T" function being used unless the shutter was set to "B". I recently encountered just such an interlock on an Agfa camera which prevents self-timer from being cocked if lens was set to "B", but it had me puzzled for quite some time.

 

[didithevan]

So this is the part. It is the p\iece sitting atop the timer unit. Below is a screw that has a gap where I supect the missing wire went. I need to replace this wire to hold the part in place and allow it to rock. Maybe the T function mentioned. ANy clues or help from a user with a similar set upninside their shutter #JeffS7444? Didi