Leica M - Post your Portraits

A couple of more recent ones from Myanmar.....

11757217805_d4f55f4722_b.jpg
[/url]











cheers, michael
 
So I tried using HC-110 for stand development to see if the grain on a 400ISO film would be less than with Rodinal, and I believe it is. This is Legacy Pro 400 shot at box speed. The recipe was:
1. Five minute pre-soak in water
2. HC-110 4ml in 500ml water, ie 1:125. 10 inversions at the start
3. One gentle inversion at 30 minutes
4. Water stop at 60 minutes
5. Fix, hypo clear, wash, dry all as usual


Leica MP, Noctilux, Imacon 848 scan

(My wife looks glum because she's stuck at home in a blizzard, not because I'm pointing a camera at her again!)

Chris
 
Here's another ISO400 film, TMY, stand-developed in HC-110. The grain is acceptable in 120 film, but a bit much for 35mm.

Amanda


Chelsea

Both Leica M7, Summilux 50, yellow filter, TMY, HC-110, Imacon 848 scans.

Chris
 
I do TMY in D-76 @68 degrees with gentle agitation as recommended. Much less grain.
 
Trey - bummer about that hole in the shutter thing - you should maybe see if you can get that fixed. Because the portraits otherwise are really good.
 
johnny scarecrow said:
Trey - bummer about that hole in the shutter thing - you should maybe see if you can get that fixed. Because the portraits otherwise are really good.
Click to expand...

I seem to remember reading a while ago that you can do this yourself with liquid plastic, however there are loads of people on this forum who know more about this kind of thing than me so you might like to do a new post about the problem. As has been said, lovely portraits otherwise :)
 
You must log in or register to reply here.
Back
Top Bottom