Leica LTM Leica Screw Mount Conversions - Show Yours

Leica M39 screw mount bodies/lenses
Erik,

How can you tell your IIIa started life as a chrome camera? Is there any physical evidence or are you referring to the serial number? Not doubting, just curious.

Michael
 
Dralowid said:
Erik,

How can you tell your IIIa started life as a chrome camera? Is there any physical evidence or are you referring to the serial number? Not doubting, just curious.

Michael
Click to expand...

Black IIIa's are exremely rare, practically non existant, exept of course conversions, like yours.

Yes, my reference is only the serial number.

Erik.
 
Last edited:
Yes, after the III and the Standard Leitz stopped producing black camera's. There is only 1 black IIIc known. They resumed producing black camera's with the MP and after that with the M2, of wich I own the 39th, on wich I am very proud. There are some black M3's in between, but only a few.

That is why the post-war black conversions are so very interesting to me.

Erik.
 
Last edited:
Erik,

you have such an awesome collection! i personally love black painted bodies as they show so much character each is different and each is a masterpiece.

here's my leica ii to iiif post war conversion. it's not the cleanest but it's still pretty.

3572848478_25e0633b27_b.jpg

3572046437_1edbe010b1_b.jpg
 
Leica IIIa

Leica IIIa

Hi guys, I was wondering if anyone could shed any light on my Leica I to IIIa conversion, serial number 61051. I was wondering if it was possible to estimate when the work might have been carried out and any other interesting information that may be relevant... Thanks!
 
Last edited by a moderator:
Everything said about your beautiful camera 61051 seems right. The flash contact on the rear however is not by Leitz. You can (and should) have it removed by a competent repairman.

Erik.
 
Guys, thanks again for all your info! Eric, yes the flash sync bothers me and from reading this thread I was aware that it could be removed but won't I then be left with just a hole in the top plate?! I'll post a picture of the black M2 in a relevant thread over the weekend sometime. Regards.
 
Simon D. said:
Eric, yes the flash sync bothers me and from reading this thread I was aware that it could be removed but won't I then be left with just a hole in the top plate?
Click to expand...

When you have a good repairperson he wil solder a small circular brass plate into the hole and he will paint it black. When it's well done, you'll see almost nothing of it.
Removal of the flash-contact is important because more often than not it disturbs the functioning of the camera.
I'm curious to that black paint M2!

Erik.
 
You must log in or register to reply here.
Back
Top Bottom