Need help! why my pic's looks like this?

[Mikey_Rotten]

Hello everyone! today I developed couple of Ilford Delta 100 at home.

I tested Agfa Rodinal one shot developer and Agfa ag fix for the first time and all my pictures came looking like this.

Looks like all the edges have blurred somehow :bang:

 

[Mikey_Rotten]

Heres a bigger one

 

[Mikey_Rotten]

http://www.flickr.com/photos/micomikkonen/5986946751/#/photos/micomikkonen/5986946751/lightbox/


http://www.flickr.com/photos/micomikkonen/5986946687/#/photos/micomikkonen/5986946687/lightbox/

 

[Mikey_Rotten]

Developing time for Ilford delta 100pro whit rodinal is 9min. I accidentally kept it for 8 min. Could that be the problem?
(temp was 20 'C)

 

[Pherdinand]

looks more like it is seriously underexposed, and then a bit underdeveloped too that won't help it

 

[Peter S]

Just wanted to say it looks underdeveloped and maybe a bit underexposed. The blurry edges look like vignetting to me, the development seems to be even.

 

[Gabriel M.A.]

I agree, it could be light fall-off (a.k.a. "vignetting"), which is often more visible when underexposing. Either they are underexposed on film or during scanning.

If these shots were taken with a wide-angle, I really wouldn't worry about it, as the vast majority of wide-angles exhibit this.

 

[dovi]

Was the stop and fixer fresh?

 

[gb hill]

I don't think it's totally a problem in developing,yes the man & car look under exposed but it could be scanning or the lens vignetting. Like some one else stated the developing looks pretty even.

 

[FrankS]

What do the negs look like, in terms of density and contrast?

 

[filmfan]

Blurriness on the edges (not darkness) comes from not having your film flat when scanning.

 

[Chris101]

Yep. There are exposure problems, but I think Filmfan has nailed the edge blur problem.

 

[cosmonaut]

When you dry the negs be sure and hang a clothes pin on the end of the roll. This helps prevent curling that in turn causes the negs not to be flat in the scanner.

 

[Mikey_Rotten]

The problem was because I used the digital ice technology in my scanner. Now after some research I have noticed that the ice tech doesnt work with BW film.😛