New lens hood for f1.1 Nikkor!

Christian.H2003

Christian.H2003

Newbie
Local time
6:39 AM
Joined
Aug 8, 2024
Messages
1
Location
Salzburg, Austria
View My Gallery
Hello Ladies and Gentlemen!
I've decided to quit lurking and share some stories about my Nikon RF collection.

To start i'll show a recent acquisition: a newly made lens hood for the f1.1 Nikkor!

They are made by "Old Lens Junkies" from Japan.

bild2.jpg

Bild3.jpg

Roughly the size of the original. They are made from solid brass and weigh around 200 grams.

bild4.jpg

These will also allow you to screw in modern 67mm filters. Although i haven't got any yet.

I know this may come across as a shameless advertisement, but i really wanted to share that these are being made new.

Best regards
Christian
 
For all those Nikon rangefinder users who want to protect their expensive and rare lens hoods, I've designed a few for 3D printing.
Greetings from the Mostviertel region!
 
@ Christian.H2003:
Es gfreit mi ganz damisch, daß es in Österreich a nu andere Nikon Meßsucher Benutzer gibt.
...............................
I am incredibly pleased that there are other Nikon rangefinder users in Austria.
 
Alpsman said:
For all those Nikon rangefinder users who want to protect their expensive and rare lens hoods, I've designed a few for 3D printing.
Greetings from the Mostviertel region!
Click to expand...
i printed all of these thank you so much. If you have any interest in designing for the 135mm or the 35mm f2.5 final black version and same for 28mm please let me know as i have and can share dimensions if needed.
 
drsdwoodgate said:
i printed all of these thank you so much. If you have any interest in designing for the 135mm or the 35mm f2.5 final black version and same for 28mm please let me know as i have and can share dimensions if needed.
Click to expand...
It is very commendable that ya print em all
🙂
And yep I'm also interested in designing those three ya mentioned.
I could only design those I have or have access to measurements.

I need:
length of the thread ( I 've seen, not all threads have the same length, some are 4 mm long, some are a little bit shorter, some are . . .)
diameter of the thread
pitch of the thread
Length without thread
largest diameter.
a pix would also help because especially those for wideangles are mostly conical.

Also: I dont have any of these three lenses.
Are you willingly ta make a testprint when I send you the stl files ? 😇
Greetings from snowy 🇦🇹 👋
 
drsdwoodgate said:
i printed all of these thank you so much. If you have any interest in designing for the 135mm or the 35mm f2.5 final black version and same for 28mm please let me know as i have and can share dimensions if needed.
Click to expand...
Hi - its me again.

I browsed Mr. Rotolonis book.
According to his book
the thread diameter for the 28/3,5 is 43 mm
the thread diameter for the 35/2,5 is 43 mm
the thread diameter for the 135/4 is 40,5 mm
aaand the thread diameter for the 135/3,5 is 43 mm.
so far so good.

But I also need the pitch.
According to the holy list of filter threads
de.wikipedia.org

Filtergewinde – Wikipedia

de.wikipedia.org de.wikipedia.org
the 40,5 will have a 0,5 mm pitch
and the 43 mm will have commonly a 0,75 mm pitch but also can have a 0,5 mm pitch. 😵‍💫
Threads can be a threat.

Anyway:
I can make a few test patterns with which ya can check the thread so that they wont become a threat.
🙂
Greetings from still snowy Austria . . .
 
Alpsman said:
Hi - its me again.

I browsed Mr. Rotolonis book.
According to his book
the thread diameter for the 28/3,5 is 43 mm
the thread diameter for the 35/2,5 is 43 mm
the thread diameter for the 135/4 is 40,5 mm
aaand the thread diameter for the 135/3,5 is 43 mm.
so far so good.

But I also need the pitch.
According to the holy list of filter threads
de.wikipedia.org

Filtergewinde – Wikipedia

de.wikipedia.org de.wikipedia.org
the 40,5 will have a 0,5 mm pitch
and the 43 mm will have commonly a 0,75 mm pitch but also can have a 0,5 mm pitch. 😵‍💫
Threads can be a threat.

Anyway:
I can make a few test patterns with which ya can check the thread so that they wont become a threat.
🙂
Greetings from still snowy Austria . . .
Click to expand...
Right they are 0.5mm pitch and thank you!!
 
OK, now that we/I have the diameters and the pitches of the threads I just only need the length and the diameters of the hoods and then I can design some prototypes 🙂
 
Alpsman said:
OK, now that we/I have the diameters and the pitches of the threads I just only need the length and the diameters of the hoods and then I can design some prototypes 🙂
Click to expand...
Here's the first two:

The 2.8cm f3.5 hood has a diameter of 70mm and a width of about 20.5mm including the threads [ie. all of it]. It's actually two rings. The bottom ring with the threads is 56.85mm diameter and width of 8mm.

The 13.5cm hood is a diameter of 55.5mm and a length of 41mm.
 
drsdwoodgate said:
Here's the first two:

The 2.8cm f3.5 hood has a diameter of 70mm and a width of about 20.5mm including the threads [ie. all of it]. It's actually two rings. The bottom ring with the threads is 56.85mm diameter and width of 8mm.

The 13.5cm hood is a diameter of 55.5mm and a length of 41mm.
Click to expand...
And now found the 3.5cm f2.5 hood which has a diameter of 66mm and a height of 25mmm.

I don't have the other one 135mm f4.

Thank you!
 
drsdwoodgate said:
And now found the 3.5cm f2.5 hood which has a diameter of 66mm and a height of 25mmm.

I don't have the other one 135mm f4.

Thank you!
Click to expand...
Than YOU

To avoid more littering of "ChristianH.2003"s thread I opend one specific for the remaking of the lenshoods.
So please if anyone have suggestion, pictures or whatever for these lenshood:
A

Thread '3D printed replicas of lenshoods for the Nikon Rangefinders lenses 2.8cm; 3.5 cm and 13.5 cm'

Continuation from "Christian.H2003"s thread about the replicas of lenshoods.

Thanx to "drsdwoodgate" who suggested me making some more lenshoods I will continue.
He supported me with measurements of lenshoods I dont own by myself.

>>>>
The 2.8cm f3.5 hood has a diameter of 70mm and a width of about 20.5mm including the threads [ie. all of it]. It's actually two rings. The bottom ring with the threads is 56.85mm diameter and width of 8mm.

The 13.5cm hood is a diameter of 55.5mm and a length of 41mm.

And now found the 3.5cm f2.5 hood which has a diameter of 66mm and a height of...
  • Like
 
You must log in or register to reply here.

Similar threads

TenEleven
Lomography x Zenit Mercury-2 Lens 35mm f2
Replies
6
Views
717
TenEleven
TenEleven
J
Did Nikon really blow Leitz and Zeiss out of the water in 1950? Not quite, but....
Replies
9
Views
2K
aoresteen
aoresteen
J
  • Article Article
The Canon F-1 vs. the Nikon F2: Battle of the Second-Generation Titans!Both are pro-grade battleship 35mm SLRs, but they aren’t exactly equal
2 3
Replies
55
Views
2K
Dogman
Dogman
J
35mm Still-Picture Photography: It began with scale focusing cameras! Back To Basics. Part 1, From the first to half-frame 35s of then and now.
Replies
12
Views
2K
rick oleson
rick oleson
Miles.
Topcor LTM Lens Compendium
2
Replies
21
Views
7K
John Shriver
J
Back
Top Bottom