traveler_101
American abroad
My feeling is that Raid is going to end up buying this lens--the black version though.
It is possible to chrome plate alloys - but it is quite complex. You have to "strike" a layer of copper on the alloy first, then nickel and after that chrome. The material build up interferes with tolerances and it is prone to "flake" a bit. I did a series of Rapidwinders in chrome on alloy. gave me lots of problems with "ridging" along edges - it was easier to go to a brushed finish instead.I think it's a question of weight. The black lens is much lighter. For a lot of people that is important. The havier chrome version is made to look like the original from the fifties. It is not possible to plate aluminium with chrome, hence the heavy brass.
Erik.
Does the new Nokton 50/1.5 share the same optical formula with the older LTM type?
![]()
While in Japan last week I borrowed a chrome M-Nokton 50mm f1.5. I have had the black one for while it has become my main 50 - almost displacing the C Sonnar 50mm f1.5 from "favourite" 50mm status. Optically there is of course no difference between the chrome and black - but the chrome looks pretty damned good on a M2!
M2, Visoflex III, V-Elmar 65f3.5, Kodak Double X - developed in Td 201.
![]()
It has a certain sculptural quality in chrome! Nikon F3HP, Zeiss ZM Macro Planar 50mm f2.0. Adox Slivermax, rated at @160 and developed in Td 201.
Interesting serial number you have, Tom, 823000X. Mine is 8330327, and I thought mine was early! Yours must be some kind of prototype.
What a lens. Surely beats all other 50's I have, and I have a lot of them.
Erik.
Has anyone used an m-adapter and the Nokton 50/1.5 on the Olympus E-M1?
If so, what's been your experience? Any input would be helpful.