Alpsman
Well-known
With this mount for the Nikon SP rangefinder camera, an eye correction lens from a cheap pair of reading glasses can be attached in front of the eyepiece so that the viewfinder image appears sharp again.
Download and description here:
www.printables.com

Download and description here:
Nikon SP Augenkorrektur; Nikon SP eye correction Dioptienkorrektur eyepiece correction by blechbude | Download free STL model | Printables.com
Nikon SP Augenkorrektur; Nikon SP eye correction Dioptienkorrektur eyepiece correction | Download free 3D printable STL models


Cascadilla
Well-known
Thanks for this--now I just have to find someone with a 3D printer!
Alpsman
Well-known
Many private owners of 3-D printers keep it a secret that they own one, because otherwise they would have too many "friends" too quickly.Thanks for this--now I just have to find someone with a 3D printer!
There are many service providers who can print this.
Cascadilla
Well-known
Could you list a couple?There are many service providers who can print this.
I use a small shop called panashape, they do SLS (selective laser sintering.) This design should work well with that tech.
They are about $15 for 1 piece, including a setup charge. Price drops to about $4 each with quantity. This is for the standard quality, other options increase the price.
They are about $15 for 1 piece, including a setup charge. Price drops to about $4 each with quantity. This is for the standard quality, other options increase the price.
Timmyjoe
Veteran
If you're here in the States, many local libraries now have 3D printers that library members can use for a small fee.
Best,
-Tim
Best,
-Tim
Alpsman
Well-known
I'm already thinking about putting an accessory shoe on it, but I don't yet know how to design the clamping so that the - usually expensive - viewfinder doesn't fall off.
Luckily with SPs there isn't much reason to use an aux viewfinder. 
Alpsman
Well-known
Yes yes, I know.Luckily with SPs there isn't much reason to use an aux viewfinder.![]()
The SP just stands apart from the mortile rest.
But apart from the fact that that is not the point, it is about the fact that there is an accessory shoe on top - perhaps you want to mount a flash - a viewfinder is very helpful for the 12mm Voigtländer, for example.
It is not a question of whether we need it, it is a question of whether we have it
By the way: THANX for the pix & your feedback
Last edited:
Cascadilla
Well-known
I just received my SP eye correction holder and it fits the accessory shoe perfectly. Do you have any hints on how to cut the plastic lenses from a pair of reading glasses? I tried a shop knife with a fresh blade and an Exacto #1 blade and neither one seems to make much of an impression on the plastic. Thanks for any suggestions.
Alpsman
Well-known
For the rectangular lens for the SP-holder i used a mini hacksaw like thisI just received my SP eye correction holder and it fits the accessory shoe perfectly. Do you have any hints on how to cut the plastic lenses from a pair of reading glasses? I tried a shop knife with a fresh blade and an Exacto #1 blade and neither one seems to make much of an impression on the plastic. Thanks for any suggestions.
slow and gentle so ya dont slip and scratch the glass.
You can use a piece of cardboard as a ruler.

Amtech Junior Mini Hacksaw 6in
Shop Amtech Junior Mini Hacksaw 6in online or visit us in-store at Leyland SDM. Next day delivery available.
For the round lens for the S2 holder i used a Dremel with a circular saw blade.
For the finishing fit I used a file.
Attention!! coat the lens with some tape do ya don't scratch it accidentally. See / read instructions at printables.
I also suggest to melt the edges on at least three spots with a hot screwdriver because when you need to exchange the lens, it is easier than if it is glued in.
Happy shooting
Cascadilla
Well-known
Thanks for the info--I will have to try this.For the rectangular lens for the SP-holder i used a mini hacksaw like this
slow and gentle so ya dont slip and scratch the glass.
You can use a piece of cardboard as a ruler.
![]()
Amtech Junior Mini Hacksaw 6in
Shop Amtech Junior Mini Hacksaw 6in online or visit us in-store at Leyland SDM. Next day delivery available.leylandsdm.co.uk
For the round lens for the S2 holder i used a Dremel with a circular saw blade.
For the finishing fit I used a file.
Attention!! coat the lens with some tape do ya don't scratch it accidentally. See / read instructions at printables.
I also suggest to melt the edges on at least three spots with a hot screwdriver because when you need to exchange the lens, it is easier than if it is glued in.
Happy shooting![]()
Alpsman
Well-known
If you use a Dremel with a circular sawblade also - slow and gentle.Thanks for the info--I will have to try this.
To high rpm will melt the plastic of the lens.
Cascadilla
Well-known
Alpsman
Well-known
Thank you for your feedback!I finally got the reading glass lens cut out and mounted on my SP. It is great to be able to see the 50 mm frame lines and a clear focusing spot!
May your vision always be clear and, above all, sharp ;-)
Greetings from Austria: Dieter
Cascadilla
Well-known
Thanks for creating the 3D program for this--it makes this camera much more usable for anyone who needs glasses.Thank you for your feedback!
May your vision always be clear and, above all, sharp ;-)
Greetings from Austria: Dieter
Phil_F_NM
Camera hacker
Man, I miss my SP and all those great lenses.
Phil
Phil
Alpsman
Well-known
One disadvantage still remains. While you can see through the viewfinder without glasses, the numbers on the lens aperture ring and the shutter speed dial are blurry without glasses. :-(Thanks for creating the 3D program for this--it makes this camera much more usable for anyone who needs glasses.
If you construct an additional correction lens holder for the aperture ring and shutter speed dial, this "thing" becomes a bit unwieldy.
. . . .
But you can't have everything.
. . .
Maybe use contact lenses?
. . .
It is a shame.
My SP is older than me and still works without squeaking and still can see sharp ;-)
Some things you really should take to your grave.
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.