Replaced levers on M5?

[HuubL]

Anybody did that? photos?

 

[JNewell]

I replaced the black levers and blind screws on my late chrome M5 with chrome M4 levers and the traditional screws with spanner holes, but that wasn't what you were asking. My guess is that the rounded M2/M3 levers (and the shortness of the PV lever) would clash visually with the large, blocky look of the M5. YMMV!

 

[HuubL]

I replaced the black levers and blind screws on my late chrome M5 with chrome M4 levers and the traditional screws with spanner holes, but that wasn't what you were asking. My guess is that the rounded M2/M3 levers (and the shortness of the PV lever) would clash visually with the large, blocky look of the M5. YMMV!

Yes, I like the earlier M4 style levers better than the later ones. But I was indeed wondering about the M3/M2 levers. Perhaps you're right and the M5 is too much of a brick 🙂 for wearing these ornaments in style 🙂

 

[czamagni]

I did it on my m5 for the rewind lever. You have just unscrew the collar ring around the release button very carefully and then you can swap the lever. For the front levers it's basically the same action you ahve to do, but the M2/3 levers are too thin for me...
Regards