kshapero
South Florida Man
For real!! Who's ready to lay that kind of money down? Not me. I think this is not the way to introduce a product.
With the world economy hurting, seems like cameras makers are responding by creating $1,000+ P&S cameras.
I went for the GX200 for $550. An extra $1100? I don't think so.i think that's a reasonable price. people who went for the grd series will be fine with that.
I went for the GX200 for $550. An extra $1100? I don't think so.
All you're saying here is that you wouldn't pay this much for a camera which, frankly, is not that interesting, particularly when you're comparing the price of a camera with a zoom lens and a tiny sensor the size of the nail on your pinky with a camera that has a high-quality prime lens and a large APS-C sensor. And, in a any case, it's premature to make this judgment as the camera is not even out yet and has not been critically reviewed. Also, you're not taking into account the concept of the GXR system with its lens/sensor modules, which will, in itself, command a premium.I went for the GX200 for $550. An extra $1100? I don't think so.
Thus, it seems to me, that once there is a new sensor, that there will be changes in the lens, as the sensor/lens combination is optimized. That will mitigate the "waste" of getting rid go both the lens and sensor when upgrading. The GXR brochure also elaborates on how the closed sensor/lens module permits optimization:Compact, high-performance lens design at a level only possible with the interchangeable unit system :
––––––––––––––––––––––––––––––––––
It is the lens that gives life to the photograph. In interchangeable lens camera systems up to now, the distance from the mount and the back of the lens to the sensor image plane was subject to requirements for flange back distance and back focal length. This made it difficult to achieve both compactness and high optical performance.
Eliminating the lens mount, however, means that the back focal length can be freely defined for the GXR, enabling it to use the most optically efficient lens designs with the minimum size. In addition, combining the lens and image sensor increases design flexibility so camera units can be developed based on a variety of concepts. This practical inspiration has given birth to a totally new camera system with portability, high image quality and superb expandability and growth potential as a system.
Designs optimized to make the most of lens and image sensor capabilities
-------------------------------------------------------
In order to make the best use of the inherent power of the lens and the image sensor, the ideal solution is to combine both in a single unit. Consider, for example, the low-pass filter covering the surface of the image sensor.
The dilemma faced is that while the filter helps prevent color noise and color moiré, increasing this benefit results in an ever greater sacrifice in lens resolution. Traditional interchangeable lens systems must use a single low-pass filter for all lenses so they are unable to avoid situations where the filter effect is excessive or inadequate. With the GXR, on the other hand, we can design a low-pass filter optimized for the resolution of the specific lens. In this way, Ricoh has succeeded in effectively preventing color noise while minimizing filter influence on lens resolution.
This also is not what the GXR system is all about. Why all this inane stuff?The first company to produce a full frame 35mm equivalent M mount module/camera with EVF focusing under $1500 total wins...
This also is not what the GXR system is all about. Why all this inane stuff?
—Mitch/Bangkok
Walks in Bangkok (GRD3)
But consider that for the GR1 film camera Ricoh made a telescoping lens as well in order to keep the size of the camera down — as that was the market niche that they were addressing.If Ricoh had included a APS-C 28 f/2.8 evof lens to create a super GRD without the inherent mechanical weakness of a telescoping mechanism this launch might have been more interesting.
But still nothing compares to the ease of use of a scale focused mechanical helicoid lens. Olympus don't get this nor does Ricoh or the Leica X.
Don't you think that an Epson/Voigtländer M module for the GXR would be a sure winner.
1. Elimination of the sensor dust problem that comes from changing lenses.
2. Providing the user with the same interface for widely different lens/sensor combinations, which is a great plus because switching between different digital cameras can be confusing: not like switching between two film cameras, like a Leica M and a Nikon F, for example. So, now, one will be able to use different camera formats, while maintaining the same user interface.
3. Optimizing the lens and sensor combination for each lens.