xayraa33
rangefinder user and fancier
how hard is it to get these two items and install them?
http://cgi.ebay.com/Nikon-S2-Rangef...ryZ30038QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/Nikon-S2-Rangef...ryZ30038QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Last edited:
Vickko
Veteran
Biggest challenge is finding the parts and the screws.
Once you have the parts, the top deck has to come off, then the mount bracket for the shoe. The shoe attaches from underneath. The shoe attaches via screws to the mount bracket, then the mount bracket to the body casting, then the top deck goes back on. The stud screws on from outside.
Simple, right?
Vick
Once you have the parts, the top deck has to come off, then the mount bracket for the shoe. The shoe attaches from underneath. The shoe attaches via screws to the mount bracket, then the mount bracket to the body casting, then the top deck goes back on. The stud screws on from outside.
Simple, right?
Vick
Vickko
Veteran
Oh, if you find the parts and buy the camera, I'll install it for you.
Vick
Vick
Cale Arthur
---- ------
Maybe Pete Smith would have these parts.. would be worth a call. My question is: why, in the name of all that is holy, would someone remove these items in the first place?!
--c--
--c--
michaelging
Established
The flash shoe on these and the contax cameras were meant for the finders or the very light flash bulb holder. Some people will try and mount a on camera flash on the shoe and this can pull it right off the camera. I bet that is what happend here.
The serial numbers on the body/lens don't match the serial numbers on the guarantee card 
