TTNC
Member
Sending my Electro 35 GSN in to Russ at Camerarefurb.com for a CLA / tuneup. This will be the third camera I have sent to him. First two came back looking like new!😀
Sending the GSN in to Russ
- Thread starter TTNC
- Start date
- Latest activity Latest activity:
- Replies 10
- Views 3K
farlymac
PF McFarland
Good idea. I've got a GTN that's going to head his way after I get a couple other camera repairs out of the way.
PF
PF
KoNickon
Nick Merritt
I have a couple I'm thinking of sending him myself. I'm willing to remove the top cover and clean the viewfinder, but the Pad of Death is beyond my expertise, for sure.
TTNC
Member
I won't even try to remove the top cover. I did send another GSN to a guy in China who hand stitches leather half cases for cameras. He does not make one for the GSN but thought he might have another case that fits well. Anyway, I had an extra donor and maybe he will make a GSN case.
Austintatious
Well-known
Russ has worked on three Yashicas for me. He does excellent work !
Lynx 5000e on Red by carlosyashinon, on Flickr
Lynx 5000e on Red by carlosyashinon, on Flickr
myoptic
Member
I am brand new to Yashica RF, and want advice about where to send my Yashica 35 for repair/CLA.. and lens separation work. I have heard of Mark Hama, and Russ at Camerarefurb.com. Would one be recommended over the other for any reason?
TTNC
Member
Have used them both and quite satisfied with both also.
ColSebastianMoran
( IRL Richard Karash )
Both are terrific. Russ has done several cameras for me, including the one below. Mark did a troublesome GTN and a GX.
Here's a "red lettering" GT from Russ which I recently sold here on RFF. Seems like too many of these jumped into my possession.
Here's a "red lettering" GT from Russ which I recently sold here on RFF. Seems like too many of these jumped into my possession.
TTNC
Member
Got the baby back! Now to load up some film and get to shooting.
bhargav
Member
My newly acquired lynx 1000 is slightly misbehaving. The shutter press button is suddenly a little unreliable. Had to open the film compartment (ruining a few exposures) and then reset the button at bottom a few times to make it work again. Also the light meter is not working. Any suggestions where I can send it for service in the UK.
TTNC
Member
I am not familiar with the UK, just here in the US. You might check with the Yashica forum though.
Similar threads
