ncc1701
Established
I thank you all for inspiring me to get into macro!
I love it. I have truly enjoyed my first few hours with this setup.
R-d1 --> Visoflex III (with chimney Hood) --> Leitz Bellows II
Skagen Watch & Leaf- 75mm color heliar
Nickel- Leica Summitar 50mm
Now I want to try some water drops, Could anyone recommend a macro ring flash?
I love it. I have truly enjoyed my first few hours with this setup.
R-d1 --> Visoflex III (with chimney Hood) --> Leitz Bellows II
Skagen Watch & Leaf- 75mm color heliar
Nickel- Leica Summitar 50mm
Now I want to try some water drops, Could anyone recommend a macro ring flash?
Attachments
Al Kaplan
Veteran
Ring flashes give you circular donut shaped reflections of the flash on shiny surfaces, and don't give you much in the way of modeling. Try tenting the subject with white paper or cloth, using bounce cards etc., butunless you're illustrating a technical book where all sides must be illuminated don't use a ring flash.
laptoprob
back to basics
I have a Minolta macroflash, made up of 4 separate tiny flashes. And you don't want to use all four together. Ringflash is indeed terrible.
Back from the X700 days. So I can use it with TTL on the CLE! Otherwise all manual.
Back from the X700 days. So I can use it with TTL on the CLE! Otherwise all manual.
andreas.pichler
Established
Someone asked for Visoflex photos...this is a shot of a classic car MGA taillight (1:18 scale).
I was fishing in the E-Bay some nights before, and found a Visoflex I.
So setup as follows: Visoflex I with 45 degree magnifier, lens is a Helios 44, aperture 4.
At the beginning, it was not possible to tighten the LTM/M adapter in the correct angle. My first thought was: Throw the Viso back in the bay, but then I macgyvered a spacer out of a paper clip. The flange back changed for nearly 1,5 mm, which had obviously no effect to DOF. Can someone explain, why? Thats really a miracle for me. I have had expected serious front focus, but it has no effect. Epson settings are in order, I double checked it.
Cheers, Andreas
Ron (Netherlands)
Well-known
part of golden cuffs (set up with Viso 1 and bellows 1)
andreas.pichler
Established
Here we go again...first one is a thought about the german "Abwrackprämie" ("wrecking fee"), you will get 2,500 bucks from income revenue service if you trade in your old car for a new one. But the old car has to be wrecked, even it is still in good condition and running. "Green thinking" or good work of the automobile industry lobby? Decide yourself. Taken with Viso II and Leitz Elmar 4/90, aperture 8, no bellows, but complete Elmar (with tubus).
Second one is a reminiscence of good old times and next sunday morning as well...plastilin "Stirling Moss" behind the wheel of his Mercedes "Silberpfeil" (the Maerklin slotcar one, from the mid-sixties, scale 1:32). Taken with Viso I, bellows, Hektor 135, aperture 8.
Second one is a reminiscence of good old times and next sunday morning as well...plastilin "Stirling Moss" behind the wheel of his Mercedes "Silberpfeil" (the Maerklin slotcar one, from the mid-sixties, scale 1:32). Taken with Viso I, bellows, Hektor 135, aperture 8.
dreamsandart
Well-known
Hay I've been thinking of getting one for my RD-1, thought it would be fun and looks like it is! Hope there isn't a run on Visoflexes now with prices going up 
!
!
andreas.pichler
Established
@ dreamsandart: Fun? No, its not fun...it's food for the soul, it's contemplation.
You are coming home after a hard day at work. Take a deep breath. Go to the shelf, take the RD1, the viso...and for tonight, maybe the Elmar 4/90. Something to focus...maybe grand-grandpas watch.
Go to the desk, don't forget the tripod.
Now entertainment can start. Lightning. Scenerie. Playing the mirror-and-release-button-piano. Checking the results. Maybe another try...it was a nice and relaxing half an hour.
Try it out - it's really fun!
Cheers,
Andreas
Setup: RD1 with Elmar 4/90 and Viso I; setting photography with Leica Digilux 2.
You are coming home after a hard day at work. Take a deep breath. Go to the shelf, take the RD1, the viso...and for tonight, maybe the Elmar 4/90. Something to focus...maybe grand-grandpas watch.
Go to the desk, don't forget the tripod.
Now entertainment can start. Lightning. Scenerie. Playing the mirror-and-release-button-piano. Checking the results. Maybe another try...it was a nice and relaxing half an hour.
Try it out - it's really fun!
Cheers,
Andreas
Setup: RD1 with Elmar 4/90 and Viso I; setting photography with Leica Digilux 2.
Ron (Netherlands)
Well-known
This week I found the below coin in my wallet, and first thought it was a falsh Euro. However it seems a new one, issued because of 10 years EMU. Here shot with Hektor 135mm on a Viso I with Bellows I.
Last edited:
Mr_Flibble
In Tabulas Argenteas Refero
Haha Ron, I had the exact same experience with that new Euro coin last weekend.
Thought it was a fake too, so I put it aside until someone told me it was legal currency
Oh, great job on the close-ups guys, now I have to get a visoflex too.
Thought it was a fake too, so I put it aside until someone told me it was legal currency
Oh, great job on the close-ups guys, now I have to get a visoflex too.
ncc1701
Established
R-D1- Visoflex Telyt 280mm Moon Photos
R-D1- Visoflex Telyt 280mm Moon Photos
Both 100% crop, tweaked exposure and sharpened.
Telyt-V 280mm F4.8 @ f22 on Visoflex III with Chimney Hood
Small moon with this setup above. With the sensor crop Telyt 280mm becomes a 420mm.
Large moon shot with a "BGN" Komura Telemore 95 2x Teleconverter from KEH added between Visoflex and R-D1 (in no way Bargain condition by the way, KEH really rates their equipment liberally! Looks new!)
Assuming the telemore is truly 2x this Telyt 280mm = 420mm(crop) + 420(teleconverter) = 840mm!
Taken 6 days later!
My sensor is dirty but just wanted to show how versatile the Viso system is with a teleconverter that does not have a great reputation.
I think this not so damn bad! Its the moon man!
CAN WE START A VISOFLEX FORUM!?
R-D1- Visoflex Telyt 280mm Moon Photos
Both 100% crop, tweaked exposure and sharpened.
Telyt-V 280mm F4.8 @ f22 on Visoflex III with Chimney Hood
Small moon with this setup above. With the sensor crop Telyt 280mm becomes a 420mm.
Large moon shot with a "BGN" Komura Telemore 95 2x Teleconverter from KEH added between Visoflex and R-D1 (in no way Bargain condition by the way, KEH really rates their equipment liberally! Looks new!)
Assuming the telemore is truly 2x this Telyt 280mm = 420mm(crop) + 420(teleconverter) = 840mm!
Taken 6 days later!
My sensor is dirty but just wanted to show how versatile the Viso system is with a teleconverter that does not have a great reputation.
I think this not so damn bad! Its the moon man!
CAN WE START A VISOFLEX FORUM!?
Attachments
Last edited:
Ron (Netherlands)
Well-known
This time there was a Leica behind the viso, not the Epson which I sold last week.
There are many of those little beast already sitting on our windows!
There are many of those little beast already sitting on our windows!
andreas.pichler
Established
...little beasts? There a some bigger on ther way as well!
But I have to say that the color and the geometrical composition and the brightness and sharpness of your picture is exceptionell, Ron! Congrats!
Mine is just a try - taken with Leitz 4/90, Viso I and Epson R-D1
Cheers, Andreas
But I have to say that the color and the geometrical composition and the brightness and sharpness of your picture is exceptionell, Ron! Congrats!
Mine is just a try - taken with Leitz 4/90, Viso I and Epson R-D1
Cheers, Andreas
Last edited:
Ron (Netherlands)
Well-known
Well Andreas, for a try you did indeed very well, yours is also quite sharp!
Btw I forgot to mention that I shot mine with a summicron 50mm and used also the bollows I on the viso I. It was a very small juvenile mosquitoe sitting on my window in the sun.
Btw I forgot to mention that I shot mine with a summicron 50mm and used also the bollows I on the viso I. It was a very small juvenile mosquitoe sitting on my window in the sun.
andreas.pichler
Established
And here we go again...as I was looking for a book, this young girl come out of the shelf (Visoflex II, Leitz 4/90, room light plus torch from the ground):
Mr_Flibble
In Tabulas Argenteas Refero
Just 'won' a Visoflex I (1951) + Bellows + 135mm f/4 Hektor + a bunch of accessoires in a case on Ebay. Looking forward to taking some pictures of my painted miniatures with the R-D1
Last edited:
Ezzie
E. D. Russell Roberts
I'm curious as to how you get the triggers coupled. Surely the Leica standard link doesn't work?
Mr_Flibble
In Tabulas Argenteas Refero
No experience with it yet, but I guess one would actuate the Visoflex mirror first and then press the shutter on the R-D1. Another type of double release cable would do the trick too perhaps?
Mr_Flibble
In Tabulas Argenteas Refero
Received it today. Set to work right away to learn how it works. This shot was a bit trial and error.
Games-workshop Banshee miniature, f8, 1/8th of a sec, 800 ISO with 135mm Hektor
I need a better tripod, and some better floodlights
Games-workshop Banshee miniature, f8, 1/8th of a sec, 800 ISO with 135mm Hektor
I need a better tripod, and some better floodlights
Last edited:
Mr_Flibble
In Tabulas Argenteas Refero
A bit better... need to cut a viewfinder mask for the R-D1 as shown on Rich's site
