dostacos
Dan
I have an old stereo camera AND the slide viewer, anybody still make the double slide holders?
R
RML
Guest
No idea but you could make them yourself from cardboard. Not to difficult and could be a lot cheaper in the end. 
wpb
Well-known
http://home.att.net/~drt-3d/
DrT (George Themelis of Brecksville, OH) has anything you need, and he is a pleasure to deal with. He also has been very helpful by answering any questions to which I could not find easy answers. Once you see what is involved with mounting stereo slides you'll see "making your own" is all but out of the question.
DrT (George Themelis of Brecksville, OH) has anything you need, and he is a pleasure to deal with. He also has been very helpful by answering any questions to which I could not find easy answers. Once you see what is involved with mounting stereo slides you'll see "making your own" is all but out of the question.
bob338
Well-known
stereo mounts
stereo mounts
check out rmm3d.com or drt3d.com for stereo mounts. the slip in mounts that both of those sites sell are probably the easiest for an amateur stereo mounter.
good luck! if you have any stereo questions, feel free to email me, there are a couple of little tricks that make mounting these slides much easier. bob at thedownfive dot com
stereo mounts
check out rmm3d.com or drt3d.com for stereo mounts. the slip in mounts that both of those sites sell are probably the easiest for an amateur stereo mounter.
good luck! if you have any stereo questions, feel free to email me, there are a couple of little tricks that make mounting these slides much easier. bob at thedownfive dot com