Leica LTM Split rings

Leica M39 screw mount bodies/lenses
Dralowid

Dralowid

Michael
Local time
2:08 PM
Joined
Jul 5, 2006
Messages
3,611
Split rings for straps

Traditionally these were circular on screw thread cameras.

They were small, around 12mm diameter?

If so anyone know of a supplier of good quality split rings of the appropriate size preferably in the UK?
 
Amazon UK - look for split rings for key rings etc. You will find those made of flat metal as well as round wire. You could also try a locksmith if any are open under pandemic restrictions or on-line locksmith suppliers meanwhile.

Regards

Andrew More
 
Wouldn't it make sense to get brass rather than stainless-steel split rings, as the latter will eventually wear through brass, aluminum or magnesium top case strap lugs?
 
You can buy them by the sack full on eBay; not sure of the quality, but unless you're swinging your camera around your head like a bola, I wouldn't be too worried.

There's also one account selling military surplus brass split rings of the right diameter which look interesting, but I'm not sure how suitable they are for camera straps: https://www.ebay.co.uk/itm/British-...-12mm-Denim-BDs-WLA-Overalls-etc/233204369490
 
I don't think all split rings are the same. I had one work itself off my camera from a Luigi strap, resulting in my M6 with 90mm Elmarit dropping onto the stone courtyard of a French chateau. A heat attack moment requiring a stiff cognac in a nearby cafe. A dent at the rewind knob end and a bent lens hood. It still worked and a professional check out on my return home showed that no important damage had been done. Now I only use Domke straps (non-swivel) and have had no further accidents of this nature.
 
Some metals, like brass, are obviously softer and can 'pull' under load.

If you had a chrome 90 mm late Elmarit M it weighs about the same as five ltm cameras...
 
Don’t know about the UK but here in the US I pick mine up at the local hardware. They have a bunch in different sizes right next to where they cut keys.
 
BillBingham2 said:
Any good fishing outfitter store. Stainless Steel.
B2 (;->
Click to expand...


YES +2 on this !

I also had a split ring come loose but I noticed early enough before it worked it's way out completely. I went for ss fishing rings, which are a pain to open and mount but they will never come off or wear out.
 
I've had one start to work itself loose l, too. Caught it. Now I put heat shrink tube on them to secure. Seems to work but is fiddly to do.
 
I get mine from amazon, huge selection of sizes. I've also gotten them from Michaels Craft store as well as sporting goods outlets.
 
You must log in or register to reply here.
Back
Top Bottom