Spots on my Negatives

zenlibra

Crazy Leica Fox
Local time
9:32 PM
Joined
Apr 22, 2008
Messages
133
Location
Toronto
Hello All,

I've been finding a row of spots on every roll of film I've developed lately. My own research suggests this might be wetting agent, I did find a roll of Tri-X had a white residue on the base side of the film recently.

I use Ilford Ilfotol as a wetting agent and I use it at approx. 1:200. Until a few months ago all my negs were clean, now every roll has rows of these spots. I use tap water and have stuck to the same routine.

Anyone have any ideas if this is wetting agent or air bubbles? Any help to correct this problem would be much appreciated.

This is a 100% crop, I don't see the spots until I scan.

3842496709_042a580348.jpg
 
Last edited:
Hello All,

I've been finding a row of spots on every roll of film I've developed lately. My own research suggests this might be wetting agent, I did find a roll of Tri-X had a white residue on the base side of the film recently.

I use Ilford Ilfotol as a wetting agent and I use it at approx. 1:200. Until a few months ago all my negs were clean, now every roll has rows of these spots. I use tap water and have stuck to the same routine.

Anyone have any ideas if this is wetting agent or air bubbles? Any help to correct this problem would be much appreciated.

3842496709_042a580348.jpg

sorry no solution but I was going through my scans today and noticed the same thing. I use ilfotol too.
 
Back
Top Bottom