fventura
Established
Kodachrome
Kodachrome
ok, I promise, last one until next week, or my wife will divorce me...
This was underexposed, and looking at the slide it just looks very pink/magenta or something weird, not sure if I got it fixed well. I used just silverfast 8 and LR 4 to try to correct the color and exposure...
http://www.flickr.com/photos/josies/8437094354/
Kodachrome
ok, I promise, last one until next week, or my wife will divorce me...
This was underexposed, and looking at the slide it just looks very pink/magenta or something weird, not sure if I got it fixed well. I used just silverfast 8 and LR 4 to try to correct the color and exposure...
http://www.flickr.com/photos/josies/8437094354/

goffer
Well-known
Y'all are selling this pretty well. *contemplates returning M-E to buy scanner instead*
fventura
Established
PS,
the stats for the above water skier,
Andy Mapple:
11 World records
6 World Championships
14 US Masters Slalom Titles
14 Moomba Masters Titles
15 US Open Slalom Titles
12 Time Pro Tour Champion
3 Time World Cup Champion
168 Professional Victories
the stats for the above water skier,
Andy Mapple:
11 World records
6 World Championships
14 US Masters Slalom Titles
14 Moomba Masters Titles
15 US Open Slalom Titles
12 Time Pro Tour Champion
3 Time World Cup Champion
168 Professional Victories
beezil
Established
gang....
rec'vd the scanner on tuesday...
real life kept the scanner in the box until last night, finally got a chance to open up the (previously opened) box.
i attempted to run through all the initial start up and scanning procedures "as is" and can't get a scan to finish processing.
looked for the update, and noticed there is an update available dated TODAY (2/1/13)
standby.....hope to catch up to the rest of you
rec'vd the scanner on tuesday...
real life kept the scanner in the box until last night, finally got a chance to open up the (previously opened) box.
i attempted to run through all the initial start up and scanning procedures "as is" and can't get a scan to finish processing.
looked for the update, and noticed there is an update available dated TODAY (2/1/13)
standby.....hope to catch up to the rest of you
sny
Member
I have some time today and will finally upload some scans. I will try to upload full size portions of 5300 dpi scans. I have some landscape photos on Ektar 100 shot with an M6 and Summilix 35mm.
Regards,
S.
Regards,
S.
XFer
-
I will try to upload full size portions of 5300 dpi scans. I have some landscape photos on Ektar 100 shot with an M6 and Summilix 35mm.
That would be gourgeus!!! Thanks!
bigeye
Well-known
That is a fantastic cut. I don't think there is anyone under 45 slaloming anymore, though. Summer evenings...
PS,
the stats for the above water skier,
Andy Mapple:
11 World records
6 World Championships
14 US Masters Slalom Titles
14 Moomba Masters Titles
15 US Open Slalom Titles
12 Time Pro Tour Champion
3 Time World Cup Champion
168 Professional Victories
sny
Member
Hello everyone,
I'm back with a first scan. Here is a sample of Ektar 100 (sthot with an M6 and 35mm Summilux) and scanned at 5300 dpi with Silverfast. No sharpening, only negatix and iSRD.
The image (resized in Photoshop and sharpened):
The first crop:
The second crop:
Regards,
S.
I'm back with a first scan. Here is a sample of Ektar 100 (sthot with an M6 and 35mm Summilux) and scanned at 5300 dpi with Silverfast. No sharpening, only negatix and iSRD.
The image (resized in Photoshop and sharpened):

The first crop:

The second crop:

Regards,
S.
dcsang
Canadian & Not A Dentist
I don't know man... that scanner doesn't look half bad based on these current samples. I'm still waiting for B&H to have it in stock 
Cheers,
Dave
Cheers,
Dave
nightfire
Newbie
Hmm. Beautiful image (is this in Switzerland? Maybe even canton of Valais?)... but do the detail scans look a bit soft or is it just the Ektar and not the scanner?
sny
Member
Hmm. Beautiful image (is this in Switzerland? Maybe even canton of Valais?)... but do the detail scans look a bit soft or is it just the Ektar and not the scanner?
It's in Switzerland you're right, in the Canton of Valais. The scans are a little bit soft because I applied absolutely no sharpening.
I will post other scans, but so far I'm very pleased with the results.
Regards,
S.
fventura
Established
I wasn't sure if I should post this one, only because i had just started taking pictures, and i am sure this is from a cheap lens, not at proper aperture, etc etc.
But heck, I like the picture!
Ektar 100, 1991, Fort Point
5300dpi, ME + iSRD
crops:
thanks
But heck, I like the picture!
Ektar 100, 1991, Fort Point
5300dpi, ME + iSRD

crops:


thanks
johnny.moped
Established
I'm back with a first scan. Here is a sample of Ektar 100 (sthot with an M6 and 35mm Summilux) and scanned at 5300 dpi with Silverfast. No sharpening, only negatix and iSRD.
Looks very misfocused to me (the scanner not the camera).
Have a look at this 100% crop of an Ektar 100 scan (Leica MP - 50mm Summilux - Flextight @ 6300dpi bicubic downsampled to 5300dpi).
Attachments
johnny.moped
Established
I wasn't sure if I should post this one, only because i had just started taking pictures, and i am sure this is from a cheap lens, not at proper aperture, etc etc.
But heck, I like the picture!
Ektar 100, 1991, Fort Point
5300dpi, ME + iSRD
These ones actually look better, though the grain is a bit to much pronounced for my taste.
Would be interesting to see some wet scanned examples with this scanner. I'm pretty sure betterscanning will come up with their own holders.
kanzlr
Hexaneur
johnny.moped
Established
Full resolution Superia 200 scan:
It's funny to see stupid Silverfasts iSRD failing so badly (look at the details that got messed up).
But resolutionwise it looks good.
fventura
Established
These ones actually look better, though the grain is a bit to much pronounced for my taste.
Would be interesting to see some wet scanned examples with this scanner. I'm pretty sure betterscanning will come up with their own holders.
Thanks,
How about silverfast grain reduction, or very little LR noise reduction? Or perhaps a tad less sharpening? Also, I am sure this neg was just a little underexposed.
How large do you think this can be printed?
Fábio
sny
Member
Here is another example (Portra 400), scanned at 5300 dpi:
And a crop:
Regards,
S.

And a crop:

Regards,
S.
sny
Member
Looks very misfocused to me (the scanner not the camera).
Have a look at this 100% crop of an Ektar 100 scan (Leica MP - 50mm Summilux - Flextight @ 6300dpi bicubic downsampled to 5300dpi).
![]()
I checked the negative and it's slightliy out of focus... I think the scanner isn't at fault here. I will post some other samples, which are sharper.
Regards,
S.
johnny.moped
Established
I checked the negative and it's slightliy out of focus... I think the scanner isn't at fault here. I will post some other samples, which are sharper.
Regards,
S.
Doesn't look at all to be the negatives fault.
There seem to be some of these scanners where the optic isn't calibrated correctly.
Do a google translate of this post by a Plustek sales manager: http://www.aphog.de/forum/viewtopic.php?p=219775#p219775
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.