hausen
Well-known
The anti-reflective screen covering on my RX-1 is peeling off and have contacted Sony to find out where I can send it to get repaired.
What have you just sent for repair ?
- Thread starter FrozenInTime
- Start date
- Latest activity Latest activity:
- Replies 52
- Views 6K
Vics
Veteran
My Contax IIIa is on its way back after having its port side strap lug re-installed.
trip-xa
Established
Where are you having this done?
news shooter
Established
sent and got back...
sent and got back...
Sent a nikon S3 to Dave Easterwood of Daves Camera. Corner of the baseplate took a shot, or should i come clean and say banged it against a rock after tripping on rocks. Dinged it pretty bad although the o/c still worked although stiff. Anyway sent it into Dave as there were other problems: shutter wouldn't fire and film advance didn't work.
Dave tore it completely down and replaced advance mechanism, did a complete CLA, the camera was very dirty, adjusted the shutter speeds, they were definitely off by about 1-2 stops. Now they are spot on, even 1/1000. Adjusted and cleaned rangefinder and even found a replacement back in his stash of parts.
He called and said what he had found, and communicated regularly. A great guy to deal with.
The camera is beautiful now, working smooth and even the rangefinder patch is contrasty and much better than what it was.
A great and friendly guy to talk to as he is very knowledgeable and loves to talk about cameras.
That's about it. Thanks,
News
sent and got back...
Sent a nikon S3 to Dave Easterwood of Daves Camera. Corner of the baseplate took a shot, or should i come clean and say banged it against a rock after tripping on rocks. Dinged it pretty bad although the o/c still worked although stiff. Anyway sent it into Dave as there were other problems: shutter wouldn't fire and film advance didn't work.
Dave tore it completely down and replaced advance mechanism, did a complete CLA, the camera was very dirty, adjusted the shutter speeds, they were definitely off by about 1-2 stops. Now they are spot on, even 1/1000. Adjusted and cleaned rangefinder and even found a replacement back in his stash of parts.
He called and said what he had found, and communicated regularly. A great guy to deal with.
The camera is beautiful now, working smooth and even the rangefinder patch is contrasty and much better than what it was.
A great and friendly guy to talk to as he is very knowledgeable and loves to talk about cameras.
That's about it. Thanks,
News
peterm1
Veteran
The Sony NEX cameras have the same flaw. I am not sure if they cover this and if they do it is possible, maybe likely that it will happen again. In the end I placed a stick on protector over mine and you would never know it had happened. Bloody nuisance - you would think they would learn and do something about it.
ChrisPlatt
Thread Killer
I recently bought a pristine Pentax SP1000 on eBay. I sent it to Eric Hendrickson for CLA.
Despite being in the middle of a move to a new location Eric had it back to me in no time.
For a grand total of $100 I now have the equivalent of a brand new 40-year-old camera.
Chris
Despite being in the middle of a move to a new location Eric had it back to me in no time.
For a grand total of $100 I now have the equivalent of a brand new 40-year-old camera.
Chris
sojournerphoto
Veteran
What is sensor evaluation? Did you have a problem?
I've just sent my:
- M9 to have its cracked sensor replaced (Leica are doing under warranty even though it's over 2, thank goodness)
-Monochrom to have an early low battery warning issue investigated and fixed
Nyc Dito
Established
Last month i bought a mint Widelux F6, but after close inspection, it needed some work. Sent it to Bob at Precision Camera Works (the same day i received it), and just got it back this week. Drum replacement, seals, CLA, etc. The speeds seemed off to me when i received it, and the aperture setting was stuck.
Needless to say, i got it back in perfect working order and im running a roll of tri-x through it =)
Needless to say, i got it back in perfect working order and im running a roll of tri-x through it =)
photony texas
Light Sensitive
After a local camera service for sensor cleaning they showed me that the sensor had five Pits/Defects. I sent it to NJ for evaluation. If Leica agrees that it is defective I hope they replace the sensor. Should know something next week.
Pete B
Well-known
On my first outing with my Nikon 35/1.4, and I mean NEW, I dropped my camera saving my dog who'd fallen down a hole. I should have it back next week. I'll be £200 lighter :bang:
Pete
Pete
Lou Iaquinto
Tinshed
Hi,
I sent my 11 year-old Bronica 645RF to EuroHiTech in the UK a few months ago. They replaced the winding mechanism, clutch and a CLA. Came back like new. Great service.
Lou
I sent my 11 year-old Bronica 645RF to EuroHiTech in the UK a few months ago. They replaced the winding mechanism, clutch and a CLA. Came back like new. Great service.
Lou
p.giannakis
Pan Giannakis
Miles Whitehead repaired a couple of problems on my Nikon F4s and now it is in perfect shape.
His website: [FONT=Arial, Helvetica, sans-serif]www.mwcamerarepairs.co.uk[/FONT]
His website: [FONT=Arial, Helvetica, sans-serif]www.mwcamerarepairs.co.uk[/FONT]
pixelated
Established
Last repair was a 50mm Collapsible Summicron sent to Focal Point for a front element recoat on which they did a beautiful job.
Next up will be an M4-2 which is in desperate need of a CLA, the hard part is putting it down long enough to pack it up and send it off. I've made a solemn vow to not put any more film through it until that happens.
Next up will be an M4-2 which is in desperate need of a CLA, the hard part is putting it down long enough to pack it up and send it off. I've made a solemn vow to not put any more film through it until that happens.
rjstep3
Established
urgent help required!
urgent help required!
the repair shop rang to say the meter was not working and that such a fault was not reparable.
What can I do?
Any suggestions for London, England?
rjstep3
urgent help required!
the repair shop rang to say the meter was not working and that such a fault was not reparable.
What can I do?
Any suggestions for London, England?
rjstep3
robert blu
quiet photographer
Leica m7, rangefinder calibration.
rob
rob
Flat Twin
Film Shooter
My Father has an Olympus RD in the classifieds at the moment. He had it serviced by Ed Trozka in the U.K. and he did a fantastic job. I don't have his number but I will look it out. Feel free to PM me if I don't reply in a day or so, I don't mind a nudge!
Hope that helps...
Simon
porktaco
Well-known
M9 - removal of persistent dirt on sensor.
rjstep3
Established
Thanks - Sendean thinks they can repair it, so keeping my fingers crossed they can!
rjstep3
Eric Boe
Member
Leica 28/2.8 for 6-bit modification
Leica 28/2.8 for 6-bit modification
So actually I dropped it off a week ago, but I sent in a Gen-III 28mm Elmarit for 6-bit coding by Leica. Any guesses how long to complete the work? :bang:
Leica 28/2.8 for 6-bit modification
So actually I dropped it off a week ago, but I sent in a Gen-III 28mm Elmarit for 6-bit coding by Leica. Any guesses how long to complete the work? :bang:
Steve Bellayr
Veteran
Writing about camera repair: I was asked by a friend who replaces Light Seals? Does KEH still perform this service for $45? Any other recommendations? Thanks.
