350D_user
B+W film devotee
Ilford FP4+ (35mm was good, but then I put a 120 through my Autocord), but currenly looking forward to whacking a roll of Efke R100 through a Kodak Brownie 127 mk3. 
John Bragg
Well-known
Tri-X or Neopan 400. Both rated at EI 200. Both work equally well for me. I have used Tri-X since forever, and it is my "go to" film of choice, but recently I have used Neopan as well and feel just as comfortable with it....
landsknechte
Well-known
I'm rather fond of BW400CN, Foma 100, and Foma 200. Also, Tri-X and T-MAX have always worked well for me in the past.
Ilford XP-2 Plus; versatile and can be processed at any lab you're likely to encounter. Smooth rich results, given generous exposure.
andreas
i am not digital.
TriX and PlusX in Rodinal, love the tones and grain, unmatched.
HIE in D76.
And sometimes i like the completely different look of the fuji range, great films too.
HIE in D76.
And sometimes i like the completely different look of the fuji range, great films too.
werf
andrey ivanov
ilford pan f 50
ilford delta 100
ilford delta 400 (400-1600)
fuji neopan 1600 (800-1600)
ilford delta 100
ilford delta 400 (400-1600)
fuji neopan 1600 (800-1600)
sweathog
Well-known
As far as slow film goes, I really like Ilford Pan F 50 Plus.
Sitting in the middle it has to be Delta 400.
Fast film? Neopan 1600, hands down.
Sitting in the middle it has to be Delta 400.
Fast film? Neopan 1600, hands down.
amateriat
We're all light!
Ilford XP2 Super: my all-weather-figther choice for b/w. Easy to work with, (relatively) hard for a lab to screw up. When my own developing "facilities" are once again set up (mainly a matter of where the electric film dryer gets mounted...everything else is relatively flexible), I'll get back to my HP5 and one or two slower emulsions. But even then, XP2 stays in the picture.
- Barrett
- Barrett
daaris
Established
Interested, I just overhauled my Yashica E35 GSN. The associate at the local Penn Camera here in N. VA recommended Fuji Acros Neopan100. So, I purchased, never having heard of this film. If I repaired my ligh tseals correctly I will post the results of this film.
M
Magus
Guest
Post deleted by posters request
35mmdelux
Veni, vidi, vici
Lately I've shot with some cheap Neopan (125) and found I like its results. But overall my favorite B&W film is 125/400 Ilford. My MP is loaded up with Fuji-100 as we speak and I have several rolls of Ilford HP-5 (400) for unexpected conditions. I know I can ramp up the HP-5 at least three times (1200) if necessary. What more can one ask for ?
TNRL
Member
adox 25. No doubt at all. when high speed is needed, i have used hp5, trix, adox 100 pushed, and im going to try fomapan soon.
kmack
do your job, then let go
Ilford FP4 and HP5 are my favorites
FP4+
HP5+
FP4+

HP5+

Last edited:
giellaleafapmu
Well-known
Trius said:Gene: Click here for a link to the APUG discussion of APX being "resurrected"; I'm not convinced it will be the same, or even if they will be successful. But I do hop it works out.
I guess they mean the Rollei Retro 100. I learned from this very forum it existed (I had swithced to Fuji Acros and SS100 and I did not know about the Rollei film), wanted to order a few from Fotoimpex but I ended up ordering what might be some of the last true APX100 rolls (and I have two 4x5" sheet film packs in the fridge). I will try that one as soon as the last APX100 will be finished...
GLF
pvdhaar
Peter
I shot a couple of rolls of Neopan 1600 recently, and it wasn't half bad. In fact, the prints show much less grain than I expected. Of course the big plus is that you can shoot with reasonable shutter speeds under the crummiest of circumstances.
But, I've now got a couple of rolls of TMZ 3200 lying around, first one of which is currently being processed and printed. Can't wait to see the results..
But, I've now got a couple of rolls of TMZ 3200 lying around, first one of which is currently being processed and printed. Can't wait to see the results..
W
wlewisiii
Guest
Absolute fav? Plus-X. But I expect Kodak to pull the plug w/in 2 years because the current management is really quite stupid. OTOH we might get lucky and they'll spin it off rather than just flat out kill the BW film division.
Real world & will still be there in 10 years? Fomapan 100. The nice thing is that the Foma acts almost exactly the same for me in Diafine.
William
Real world & will still be there in 10 years? Fomapan 100. The nice thing is that the Foma acts almost exactly the same for me in Diafine.
William
nikon_sam
Shooter of Film...
I have shot a ton of Tri-x in 35mm and 120 BUT I am truely falling in love with Fuji Neopan/Acros (100 & 400)
Tom A
RFF Sponsor
Tri-X as my standard film. I know it "by heart" having shot it since it was rated at 200ASA and considered a radical film by the press shooters! "200 ASA, thats impossible, grain must be HUGE". It is not a perfect film, but it will always give you a neg with something on it! I have pulled and pushed it more than taffy at a fair! As slow as 6 ASA and as fast as 6400, not pretty but it worked.
I suspect that the world is divided into two groups of people, Tri X shooters and HP5 shooters. Religion, color, creed, politics we can always find a middle ground. With the Tri X versus HP5 - not a chance!
An other favourite of mine is Kodak's movie stock Double XX. Rates 250 ASA in daylight and 200 in tungsten. It is the same old style emulsion as movies like "Casablanca", The Third man, and I suspect that George Clooney used it for "The Good German". As it is a movie stock it is biased towards the mid tones and if you use a developer like D-76 or D-96 (Kodaks developer for this film) you get nice tonality and still retains high light separation. Comes in 400ft/1000ft or even 3000ft cans!
I do use other films, but Tri X is always at hand.
I suspect that the world is divided into two groups of people, Tri X shooters and HP5 shooters. Religion, color, creed, politics we can always find a middle ground. With the Tri X versus HP5 - not a chance!
An other favourite of mine is Kodak's movie stock Double XX. Rates 250 ASA in daylight and 200 in tungsten. It is the same old style emulsion as movies like "Casablanca", The Third man, and I suspect that George Clooney used it for "The Good German". As it is a movie stock it is biased towards the mid tones and if you use a developer like D-76 or D-96 (Kodaks developer for this film) you get nice tonality and still retains high light separation. Comes in 400ft/1000ft or even 3000ft cans!
I do use other films, but Tri X is always at hand.
AlexBurdov
Member
I like TASMA FN^$ in Standart No 2 develop

350D_user
B+W film devotee
Share:
-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.