back alley
IMAGES
i'm looking for a clamp on hood that would fit a 100/3.5 lens.
my 42mm plastic push on lens cap fits so i'm thinking something around 42mm.
also, if you happen to know where i might find one.
much appreciated
joe
my 42mm plastic push on lens cap fits so i'm thinking something around 42mm.
also, if you happen to know where i might find one.
much appreciated
joe
back alley
IMAGES
doh!
too much pizza tonite.
the one that fits the 100/3.5 is a 36mm (push on) not the 42 i incorrectly stated before.
sorry g'man.
joe
too much pizza tonite.
the one that fits the 100/3.5 is a 36mm (push on) not the 42 i incorrectly stated before.
sorry g'man.
joe
John Shriver
Well-known
I have never seen the Canon hood for the later all-black Canon 100/3.5 lens with 40mm front filter ring. That's in two years of watching eBay, and going to the local camera shows.
back alley
IMAGES
mine is the 34mm filter size john.
and i think i have solved my problem.
i fitted a screw on hood on to a filter first and then tried to put the combo on the lens. after some difficulty i managed to thread it evenly and firmly on the lens.
i don't think i could take it off if i wanted.
anyway, if the lens turns out a steller performance i'll use it and if not it goes into my 'should have known better' box.
joe
and i think i have solved my problem.
i fitted a screw on hood on to a filter first and then tried to put the combo on the lens. after some difficulty i managed to thread it evenly and firmly on the lens.
i don't think i could take it off if i wanted.
anyway, if the lens turns out a steller performance i'll use it and if not it goes into my 'should have known better' box.
joe
Share: